Overview
Wired controller for Xbox and PC. The official page describes it as the durable, budget-friendly choice for Xbox. A wired controller with anti-drift Hall Effect sticks and tuned analog triggers, featuring a three-meter cable.
Features
- Anti-drift Hall Effect sticks: Sticks enhanced with an algorithm for no jitter, no drift, and no circularity error.
- Tuned analog triggers: Hall Effect technology triggers with a full response range across the trigger travel.
- Realistic and precise vibration: Four vibration motors, one in each handle and one in each trigger.
- Membrane buttons and clicky bumpers: Face buttons and the D-pad are membrane with a cushioned feel, while the LB and RB buttons operate with clicky switches.
- Full customization via supporting software: Three profile files with button remapping, stick adjustment, trigger adjustment, and vibration settings.
- Audio control from the controller: Adjust master volume and game/chat audio balance, and mute the microphone using the M button.
Device Layout and Button Names
On the front face, there is the Xbox button, View button, Menu button, Share button, A B X Y buttons, and the M button, which contains the microphone mute indicator.
On the top edge are the RB button and LB button, the RT trigger and LT trigger, and a Type-C port in the center of the top edge.
On the bottom edge is a 3.5mm audio jack.
Specifications
| Item | Detail |
|---|---|
| Supported platforms | Xbox Series X |
| Connection method | Wired via Type-C port, with a detachable three-meter cable |
| Weight | 201 grams |
| Supporting software | GameSir Nexus app |
Box Contents
| Item | Detail |
|---|---|
| Controller | 1 piece |
| Type-C cable | 1 piece, three meters long |
| User manual | 1 copy |
| Thank you and after-sales service card | 1 card |
| GameSir sticker | 1 sticker |
| Certificate of conformity | 1 copy |
Requirements: Xbox One or Xbox Series X|S, or a computer running Windows 10 or later with a USB port.
Connection and Play
Connecting to Xbox and PC
- Use the included Type-C cable to connect the controller to the device.
- Press the logo button briefly to turn on the controller.
- A solid white light indicates the connection is successful.
The logo button is the power key and indicator, and the Type-C port is in the center of the top edge.
Indicator Statuses
The light locations are in the logo button and the center M button.
| Status | Meaning |
|---|---|
| Solid white on logo button | Connection successful |
| Slow blinking white on logo button | Calibration mode |
| Solid red on M button | Microphone mute feature is active |
Button Combinations
| Function | Combination |
|---|---|
| Increase or decrease master volume | M button + D-pad Up or Down |
| Adjust game/chat audio balance | M button + D-pad Right or Left |
| Enable or disable microphone mute | Double-press M button |
| Pause mute while active | M button (press and hold) |
| Switch to default profile | M button + Y button |
| Switch to first profile | M button + B button |
| Switch to second profile | M button + A button |
| Switch to third profile | M button + X button |
| Restore device recognition | Logo button + M button for three seconds until you hear a tone, then disconnect and reconnect the cable |
| Switch input mode | Share button + Menu button for three seconds |
| Force Xbox input mode | Logo button + Share button for three seconds |
| Enter stick and trigger calibration mode | View, Menu, and Logo buttons together while inserting the Type-C cable |
Audio Control
- Press and hold the M button with the D-pad Up or Down to increase or decrease master volume; there are eleven levels.
- You will hear an alert tone when reaching the maximum or minimum level.
- Press and hold the M button with the D-pad Right or Left to increase game audio while decreasing chat audio, or vice-versa.
- You will hear an alert tone when reaching the maximum, middle, or minimum level.
Microphone Mute
- When a headset is connected to the audio jack, double-press the M button; the microphone mute indicator will turn solid red, and the mute feature will be active.
- Double-press the M button again to turn off the indicator and disable the mute feature; this is the default state.
- While mute is active, press and hold the M button to pause mute; as soon as you lift your finger, mute resumes.
Switching Profiles
Press the M button with one of the A, B, X, or Y buttons sequentially to switch to the corresponding profile.
| Profile | Combination |
|---|---|
| Default profile | M button + Y button |
| First profile | M button + B button |
| Second profile | M button + A button |
| Third profile | M button + X button |
Calibration
Stick and Trigger Calibration
- Press and hold the View, Menu, and Logo buttons while inserting the Type-C cable into the computer port; the logo button will start blinking white slowly.
- Ensure you do not touch the LT and RT triggers or the sticks, then press the A button; the logo button light will turn off.
- Press the LT and RT triggers to their full travel, and rotate the sticks at their maximum angle three times, then press the A button; the logo button light will turn solid white, indicating the end of calibration.
- After calibration is complete, the controller must be disconnected and reconnected before use.
Reset
If the light is working but there is no response in-game, use one of the following combinations as recommended by the official FAQ page.
- Press and hold the Logo button + M button for three seconds until you hear a tone, then disconnect and reconnect the cable to restore device recognition.
- Press and hold the Share button + Menu button for three seconds to switch the input mode.
- Press and hold the Logo button + Share button for three seconds to force Xbox input mode.
Supporting Software and Firmware Update
- Download the GameSir Nexus app from the Microsoft Store on Xbox or PC, or from the official website.
- Use the app to update firmware and create three custom profiles.
- The profile includes button remapping, stick and trigger zone adjustment, and vibration level.
FAQs
Controller is connected and light is working but no response in-game
Try pressing and holding the Logo button + M button for three seconds until you hear a tone, then reconnect the cable; or press the Share button + Menu button for three seconds to switch input mode; or press the Logo button + Share button for three seconds to force Xbox input mode.
Stick drifts or trigger does not respond correctly
Perform stick and trigger calibration: Press and hold View, Menu, and Logo buttons while inserting the Type-C cable into the computer port, then without touching the triggers or sticks, press the A button. Then press the triggers to their full travel and rotate the sticks at their maximum angle three times. After calibration, disconnect and reconnect the controller before use.
What platforms does the controller support?
It supports Xbox Series X|S, Xbox One X|S, Windows 10/11 systems, and the Steam platform.
Is it wired or wireless?
Wired connection only, via a detachable three-meter Type-C cable.
Are the triggers analog?
Yes, the triggers are analog with Hall Effect technology, tuned by GameSir, featuring a full response range and support for hair-trigger mode.
What type of buttons are on this controller?
Face buttons and D-pad are membrane with a cushioned feel upon each press, while the LB and RB buttons operate with clicky switches.
How many vibration motors?
Four motors, one in each handle and one in each trigger.
What is the stick feature in this controller?
Sticks enhanced with an algorithm, with no jitter, no drift, and no circularity error, with the ability to adjust dead zones and special modes via the supporting software.
What can I adjust with the supporting software?
You can create three profiles with button remapping, stick and trigger adjustment, vibration settings, and more.
Headset has no sound or microphone is not working
Ensure the headset plug is fully inserted into the audio jack on the bottom edge, ensure microphone mute is not active by checking the M button indicator, and adjust the volume using the M button + D-pad combination.
Documentation Notes
- The specifications table on the official page names the supporting software as "GameSir Nexus Legacy" app, while the printed manual sheet calls it "GameSir Nexus".
- The requirements line on the printed sheet mentions Xbox devices and Windows systems only, while the official page adds the Steam platform.
- The specifications table mentions "Xbox One" consoles, while the answer for supported platforms in the FAQ section mentions "Xbox One X|S" consoles.