Short answer: Open the screen (never past 180°), clamp the bracket firmly on the back of your laptop screen, and pull out the built-in stand for extra support. To fold it, retract the stand and close the screen in reverse order.
Open and clip it on
- Unpack the monitor.
- Open the screen in the direction shown in the manual. The screen turns from 0° to 180°: don't go past that.
- Place the bracket at the back of your laptop screen, and make sure it clamps the laptop screen firmly.
- Lift up the built-in stand at the back and pull it out to its end. It gives the monitor extra support.
- Plug the cable into the monitor and your laptop.

Thin laptop? Use the protective caps
If your laptop screen is 0.24 in (6 mm) thick or less, slide a protective cap onto each bracket clamp. They help reduce shaking. Six caps are included.

Fold it back
- Unplug the cable.
- To retract the stand, press and hold its button, then push it back in.
- Take the bracket off your laptop screen and close the screen in the reverse direction.
Safety tips
- Handle the monitor with care and don't press on the screen.
- Never turn the screen beyond 180°.
Still not working?
Shaky or loose on your laptop? See Single Play 14" troubleshooting, or contact us at aura-displays.com/pages/support with a photo of the monitor on your laptop. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).
Helpful links
Also searched as: clip on, attach to laptop, bracket, clamp, kickstand, stand, protective caps, thin laptop, shaky, fold, unfold, 180 degrees, Single Play