How do I set up my Single Play 14"?

Short answer: Open the screen, clip the bracket onto the back of your laptop screen, pull out the stand, and connect one USB-C cable. No driver is needed. If your laptop has no video USB-C port, use the HDMI cable plus the USB power cable.

Before you start

  • One cable or two. A full-function USB-C port (video output) carries video and power over one cable. With HDMI, you also need the USB-C to USB-A cable for power.
  • It needs 5V/2A. The monitor has no battery. Your laptop’s USB-C port, or a USB power adapter (not included), must supply at least 5V/2A. The Mini HDMI port never supplies power.
  • Fits laptops from 14 in to 17.3 in, with a screen lid up to 0.33 in (8.5 mm) thick.

Clip it onto your laptop

Handle it with care and don’t press on the screen. The screen turns from 0° to 180°: never force it further.

  1. Unpack the monitor.
  2. Open the screen.
  3. Place the bracket on the back of your laptop screen, and make sure it clamps the laptop screen firmly.
  4. Lift up the stand on the back of the monitor and pull it out all the way. To fold it back, press and hold its button.

Single Play 14 setup steps: folded, open the screen, clamp it on the laptop, pull out the stand, plug in the cable, with the built-in stand at the back

Ultra-thin laptop?

If your laptop screen is 0.24 in (6 mm) thick or less, slide one of the protective caps onto each bracket clamp before you clip it on. They reduce shaking. Six caps are in the box.

Sliding a protective cap onto each bracket clamp of the Single Play 14 for ultra-thin laptops

Connect it

The monitor has two full-function USB-C ports and one Mini HDMI port. There are three ways to connect it.

Use option 1 whenever your laptop allows it: one USB-C cable to your laptop, and the other USB-C port to a USB power adapter. If you don’t have a power adapter, option 2 (one USB-C cable alone) also works.

For laptops with a USB-C or Thunderbolt 3/4 port that supports video (look for a DisplayPort or Thunderbolt symbol next to the port).

  1. Plug the USB-C to USB-C cable (90° end) into one of the monitor’s USB-C ports, and the other end into your laptop’s USB-C port.
  2. Connect the monitor’s other USB-C port to a 5V/2A (or higher) USB power adapter (not included) with the USB-C to USB-A cable.

Option 2: one USB-C cable alone

For laptops with a USB-C or Thunderbolt 3/4 port that supports video and supplies at least 5V/2A.

  1. Plug the USB-C to USB-C cable (90° end) into one of the monitor’s USB-C ports.
  2. Plug the other end into your laptop’s USB-C port.

Laptop USB-C port symbols that provide video and power, and the Single Play 14 connected with one USB-C to USB-C cable

Option 3: HDMI cable + USB power cable

For laptops with an HDMI port and a USB-A port, or when your USB-C port doesn’t carry video.

  1. Connect the monitor’s Mini HDMI port to your laptop’s HDMI port with the Mini HDMI to HDMI cable.
  2. Connect one of the monitor’s USB-C ports to a USB-A port on your laptop with the USB-C to USB-A cable, for power.
  3. If the screen flickers or stays dark, plug that USB-A end into a 5V/2A (or higher) USB power adapter (not included) instead.

Single Play 14 connected with a Mini HDMI to HDMI cable for video and a USB-C to USB-A cable for power

No HDMI port? Use another video output (DisplayPort, Mini DisplayPort…) with a simple HDMI adapter (not included).

Do I need a driver?

No. It’s plug and play on Windows, macOS, and Ubuntu, and it works with every Mac, base M1, M2, and M3 models included.

Set up your display

  • Windows: open Settings › System › Display, choose Extend these displays or Duplicate in Multiple displays, and drag the screens to match where they are.
  • macOS: open System Settings › Displays, choose Extended display or mirror, and click Arrange… to place the screen.

Use the on-screen menu (OSD)

  • Press + or – to change the brightness.
  • Press Menu to open the menu, + to choose a setting, Menu to confirm, and long-press Menu to go back.
  • Useful settings: Source (Type C1, Type C2, or HDMI), Low blue light, HDR mode, Language, and Reset (factory settings).

Take it off and store it

  1. Unplug the cable.
  2. Fold the stand: press and hold its button.
  3. Unclip the bracket from your laptop and fold the screen. Folded, the screen faces inward.

The shell scratches more easily than our other models, so keep it in a sleeve when you travel.

Still not working?

See the Single Play 14" troubleshooting article, or reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screen and of the cables plugged in;
  • your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 13, Windows 11);
  • which cables you’re using and which laptop ports they go into.

Also searched as: how to set up, how to attach, clip on laptop, clamp, bracket, protective caps, thin laptop, shaking, wobbly, stand, which cable, one USB-C cable, HDMI, mini HDMI, power, 5V 2A, OSD menu, brightness, Single Play Gen 2, Single Play 14 inch, clip-on laptop monitor, attachable laptop screen