How do I open, clip on, and fold my Single Play Max 15.6" safely?

Short answer: Open the screen (never past 180°), clamp the bracket firmly on the back of your laptop screen, and pull out the built-in stand for extra support. To fold it, retract the stand and close the screen in reverse order.

Open and clip it on

  1. Unpack the monitor.
  2. Open the screen in the direction shown in the manual. The screen turns from 0° to 180°: don't go past that.
  3. Place the bracket at the back of your laptop screen, and make sure it clamps the laptop screen firmly.
  4. Lift up the built-in stand at the back and pull it out to its end. It gives the monitor extra support.
  5. Plug the cable into the monitor and your laptop.

Single Play Max 15.6" setup figures from the user manual: folded, open the screen, clamp it on the laptop, pull out the stand, plug in the cable

Thin laptop? Use the protective caps

If your laptop screen is 0.24 in (6 mm) thick or less, slide a protective cap onto each bracket clamp. They help reduce shaking. Six caps are included.

Single Play Max 15.6" protective caps from the user manual: slide a cap onto each bracket clamp

Fold it back

  1. Unplug the cable.
  2. To retract the stand, press and hold its button, then push it back in.
  3. Take the bracket off your laptop screen and close the screen in the reverse direction.

Safety tips

  • Handle the monitor with care and don't press on the screen.
  • Never turn the screen beyond 180°.

Still not working?

Shaky or loose on your laptop? See Single Play Max 15.6" troubleshooting, or contact us at aura-displays.com/pages/support with a photo of the monitor on your laptop. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).

Also searched as: clip on, attach to laptop, bracket, clamp, kickstand, stand, protective caps, thin laptop, shaky, fold, unfold, 180 degrees, Single Play Max