Triple Aero Pro Max 15.6" troubleshooting: colors, restarting, and laptop charging

Short answer: On a Mac, turn off True Tone to even out colors. If the monitor keeps restarting, it isn’t getting enough power: use the included 65 W adapter and power cable, or a stronger adapter. A screen that says "No signal" or "Power saving" isn't receiving video: check your cables (see below). Find what you see below and follow the steps.

Only one or two screens turn on? See Only one or two screens work on my Triple Aero Pro Max 15.6" in this folder.

One screen says "No signal" or "Power saving"

That screen isn't receiving video. Find which screens work:

  • Only the middle and right screens work: your laptop's USB-C port doesn't send video. Keep the USB cable plugged in and add an HDMI cable from your laptop to the left HDMI port on the monitor (the first HDMI port, next to PD).
  • Only the left screen works: the middle and right screens need the free driver. If your screens have a red peel tab, install DisplayLink. If they have no tab, install Silicon Motion. If you already removed the tab, try DisplayLink first, then Silicon Motion. See How do I set up my Triple Aero Pro Max 15.6"?
  • Only the middle screen, or only the right screen, works: one HDMI cable runs one screen. Use the black USB-C to USB-C video cable if your laptop's USB-C port supports video. Otherwise, use the USB-A to USB-C cable plus one HDMI cable in the left HDMI port.

Colors look different between screens (Mac)

The middle and right screens may look different from your laptop screen or the left screen.

  1. Open System Settings › Displays and turn off True Tone.
  2. Each screen has its own settings. Check that the color profile and brightness match on every screen, both in System Settings › Displays and in each screen’s on-screen menu.

Screens look dimmer than your MacBook? See Why do my Aura screens look dimmer or grayer than my MacBook screen?

The monitor keeps restarting

This happens when the monitor doesn’t get enough power, for example when it’s also charging your laptop.

  1. Check the power adapter. Use the 65 W adapter that came in the box, or another adapter with enough power.
  2. Check the power cable. Use the white USB-C power cable that came in the box, or another cable that can handle the same power.
  3. Use a stronger adapter. The monitor shares its power with your laptop over the USB-C video cable. If that leaves too little for the monitor, switch to a higher-wattage USB-C PD adapter.

Can the monitor charge my laptop?

Yes. The Triple Aero Pro Max 15.6" can pass up to 30 W to your laptop.

  1. Connect the monitor to your laptop’s full-featured USB-C port with the black USB-C to USB-C video cable (option 1 in the setup guide).
  2. Plug the included power adapter, or a higher-wattage one, into the monitor’s PD port.
  3. The monitor now charges your laptop through the same USB-C cable.

None of the screens turn on

  1. Check that the power adapter is plugged into the monitor’s PD port and into a working outlet.
  2. Press and hold the Menu/Power button for 2 to 3 seconds to turn the monitor on.

Still not working?

Reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the problem, and of the back of the monitor showing which cables are plugged in where;
  • your laptop model and operating system version;
  • which power adapter, cables, and driver you’re using.

More Triple Aero Pro Max 15.6" help

Also searched as: colors different, color mismatch, washed out, yellow tint, True Tone, color profile, monitor keeps restarting, turns off and on, reboot loop, power issue, not enough power, reverse charging, pass-through charging, charge my laptop, laptop not charging, power delivery, screens won't turn on, black screens, no signal, power saving, left screen no signal, left HDMI port, red peel tab, Triple Aero 15.6, Triple Aero Pro Max 15.6 Gen 2, Triple Aero Pro Max (Gen 2)