None of the screens on my Triple Aero Pro Studio 18.5" turn on or are detected — what should I do?

Short answer: The Triple Aero Pro Studio 18.5" always needs its own power adapter. Check the adapter and power cable first, then press and hold the Menu/Power button for 2 to 3 seconds to turn it on. Then reconnect the cables and check the DisplayLink driver. Do the same if the screens stayed dark after your laptop restarted or ran out of battery.

Step by step

  1. Plug in the power. Plug the white USB-C cable into the monitor's PD port (the second port, right after TYPE-C), and the power adapter into a working wall outlet. The monitor needs this power however you connect it: a laptop port can't supply enough on its own.
  2. Use the right adapter and cable. Use the 100 W adapter and the white power cable that came in the box. If you use another adapter, it must be a USB-C PD adapter of at least 100 W, with a cable that can handle that power.
  3. Turn the monitor on. Press and hold Menu/Power for 2 to 3 seconds. A short press only opens the on-screen menu.
  4. Reconnect the video cable. Unplug the cables, plug them back in, and make sure both ends are fully seated. The cable from your laptop goes into the monitor's TYPE-C port (or an HDMI port), never into PD.
  5. Use the right cable. For a USB-C connection, use the supplied black USB-C cable: it's the full-function cable that carries video. The white cable is for power only, and a charging-only USB-C cable may not carry video.
  6. Check the driver. Make sure the free DisplayLink driver is installed.
  7. Unplug your laptop's own charger. If your laptop is also plugged into its own power supply, disconnect it, then try again.

Bottom edge of the Triple Aero with, from left to right, the Menu/Power, Up (+), Down (–) and Confirm/Exit buttons, the USB-C video port (TYPE-C), the USB-C charging port (PD), and the three mini HDMI ports.

On a Mac

  1. Open System Settings › Privacy & Security › Screen & System Audio Recording and turn on DisplayLink Manager.
  2. If DisplayLink Manager isn't in the list, click + and add it manually.

macOS System Settings, Privacy and Security, Screen and System Audio Recording, with DisplayLink Manager turned on.

The screens turn on but show "No signal"

The monitor has power but isn't receiving video. Check the driver and your cables: see Only one or two screens work on my Triple Aero Pro Studio 18.5". Still nothing? Try another connection method from the setup guide.

The monitor turns on, then keeps restarting

It isn't getting enough power, often because it's also charging your laptop. See Triple Aero Pro Studio 18.5" troubleshooting: colors, restarting, and laptop charging.

Still not working?

Reach out to our support team at aura-displays.com/pages/support and include:

  • your computer model and Windows or macOS version;
  • your Aura model (Triple Aero Pro Studio 18.5");
  • your connection method and the cables you're using;
  • your DisplayLink driver version;
  • a clear, steady video showing the power cable in the PD port, the adapter in the outlet, then you holding the Menu/Power button for 3 seconds, plus a photo of the back of the monitor showing every cable.

Large videos can be shared as a Google Drive, Dropbox, or WeTransfer link. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).

Also searched as: won't turn on, not turning on, no power, no image, monitor not detected, not recognized, monitor dead, all screens black, black screens, screens dead after battery died, screens off after restart, laptop shut down and monitor stopped, power button, which button turns it on, white cable, black cable, DisplayLink not in screen recording list, Triple Aero 18.5, Triple Aero Pro Max 18.5, Triple Aero Pro Max (Gen 2) 18.5