How do I set up my Triple Aero Pro Max 15.6"?

Short answer: Unfold the stand and screens, plug the monitor into its 65 W power adapter, connect it to your laptop with one USB-C cable if your laptop allows it, then install the free driver your unit uses (DisplayLink or Silicon Motion) so all three screens light up.

Before you start

  • It always needs power. Plug the included 65 W power adapter into the monitor’s PD port, however you connect it. A laptop port can’t supply enough power on its own.
  • It needs a free driver. For USB-C and USB-A connections, install the driver before you connect the monitor for the first time (see “Install the right driver” below). On a work computer, your IT team may need to approve it.
  • The screen protectors are already on. The red tab on each screen (“Looking for your tempered glass protector? You’re touching it.”) means the tempered glass is already installed. Before you peel the tabs off, note that they also tell you which driver to use.

Unfold the monitor

  1. Put the Triple Aero on your desk, facing the right way (screens toward you).
  2. Unfold the stand and lock it in place.
  3. Rotate the folded screens about 135° so they stand up straight.
  4. Unfold the left and right screens and adjust them to the viewing angle you like.

Watch your fingers: the stand closes with a strong spring force. Hold the safe grip area with one hand while you move the stand with the other, keep your fingers away from moving parts, and fold it slowly and steadily. To pack it up, follow the steps above in reverse order (4 to 1).

Connect it to your laptop

The ports on the back are, in order: TYPE-C, PD (power), then three HDMI ports. Pick one of these setups.

Use option 1 whenever your laptop allows it: one cable to your laptop, one cable to the power adapter.

For laptops with a USB-C port that supports video (check your laptop’s specifications for video output on USB-C). One cable runs all three screens.

  1. Plug the white 6.6 ft (2 m) USB-C power cable into the monitor’s PD port and the 65 W adapter into a wall outlet.
  2. Plug the black 3.3 ft (1 m) USB-C to USB-C video cable into the monitor’s TYPE-C port.
  3. Plug the other end into your laptop’s USB-C port.

Option 1: USB-C to USB-C video cable in the TYPE-C port and the power cable in the PD port.

Option 2: one USB-A cable + one HDMI cable

If your laptop’s USB-C port doesn’t support video, or your laptop only has USB-A ports.

  1. Plug the white USB-C power cable into the monitor’s PD port and the adapter into a wall outlet.
  2. Plug the USB-A to USB-C cable into the monitor’s TYPE-C port and into a USB-A port on your laptop.
  3. Plug the mini HDMI to HDMI cable into the first HDMI port on the monitor, right next to PD, and into your laptop’s HDMI port.

Option 2: USB-A to USB-C cable in the TYPE-C port, power cable in PD, and one HDMI cable in the first HDMI port next to PD.

Option 3: three HDMI cables

Only if your laptop has three HDMI outputs. No driver needed: each HDMI cable runs one screen.

  1. Plug the white USB-C power cable into the monitor’s PD port and the adapter into a wall outlet.
  2. Plug one HDMI cable into each of the monitor’s three HDMI ports, and the other ends into your laptop. The box includes one mini HDMI to HDMI cable, so you’ll need two more.

Option 3: three HDMI cables, one in each HDMI port, plus the power cable in PD.

Install the right driver

Depending on when it was made, your monitor uses one of two free drivers. Without the driver, only the left screen works (and only over HDMI). Here’s how to tell which one you need:

Red peel tab on the screen that reads: Looking for your tempered glass protector? You’re touching it. Already installed.

  • Your screens have a red peel tab like the one above: your monitor uses DisplayLink.
  • No red tab on your screens: your monitor uses Silicon Motion.
  • Already peeled the tab off and not sure? Install DisplayLink first. If the middle and right screens stay dark, install Silicon Motion instead.
  1. Download the driver for Windows 10 or 11, macOS, or Ubuntu 20.04, 22.04, or 24.04. On Ubuntu, unzip the package, then allow the .run file to install.
  2. Run the installer and follow the prompts.
  3. On a Mac, open System Settings › Privacy & Security › Screen & System Audio Recording and turn on DisplayLink Manager.
  4. On a Chromebook, there’s nothing to install: the DisplayLink driver is built into ChromeOS.

macOS System Settings, Privacy and Security, Screen and System Audio Recording, with DisplayLink Manager turned on.

Silicon Motion

  1. Download the driver for Windows, macOS, or Ubuntu from the Silicon Motion download page.
  2. Run the installer and follow the prompts. On Windows, the driver installs as SMIUSBDisplay.
  3. On a Mac, drag macOS InstantView to your Applications folder and open it. Then open System Settings › Privacy & Security › Screen & System Audio Recording (called Screen Recording on older macOS versions) and turn on macOS InstantView.

Without the screen recording permission, macOS keeps the extra screens dark. With the driver installed, all three screens work on every Apple silicon Mac, including base M1, M2, and M3 models.

Arrange your screens

Windows

  1. Open Settings › System › Display.
  2. Scroll down and choose Extend these displays (or Duplicate these displays). Windows can only duplicate to two displays at a time.
  3. Click Identify to see which number belongs to which screen.
  4. Drag the displays to match where the screens actually sit, then click Apply.

macOS

  1. Open System Settings › Displays.
  2. Drag the displays to match where the screens actually sit.
  3. Select each screen and, under Use as, choose Extended display.

Ubuntu

  1. Open Settings › Displays.
  2. Drag the displays to match where the screens actually sit.
  3. Select each screen to set its resolution, scaling, and more.

ChromeOS

  1. Open Settings › Device › Displays.
  2. Drag the displays to match where the screens actually sit.
  3. Select each screen to set its resolution, scaling, and more.

Use the on-screen menu

The buttons control each screen’s own settings (brightness, color, low blue light, eco mode, sharpness, timer, language, source, and volume).

  1. Short-press Menu/Power to open the menu on one screen. Short-press it again to switch to the next screen.
  2. Press Up (+) or Down (–) to move between menus.
  3. Press Confirm/Exit to select.
  4. Press Up (+) or Down (–) to change the value.
  5. Long-press Confirm/Exit to leave the menu.

To turn the monitor on or off, press and hold Menu/Power for 2 to 3 seconds.

Still not working?

If some screens stay dark, see our Triple Aero Pro Max 15.6" troubleshooting articles. If that doesn’t help, reach out to us at aura-displays.com/pages/support and include:

  • a photo of the back of the monitor showing which cables are plugged in where;
  • your laptop model and operating system version;
  • which cables you’re using, which laptop ports they go into, and which driver you installed.

More Triple Aero Pro Max 15.6" help

Also searched as: how to set up, how to connect, setup guide, installation, unfold, open the stand, fold, which cable, one cable setup, USB-C setup, HDMI setup, which driver, DisplayLink install, Silicon Motion, SM770, SMI USB Display, InstantView, red sticker, red tab, tempered glass sticker, extend displays, arrange displays, Windows display settings, Mac display settings, OSD menu, brightness, turn off monitor, Triple Aero 15.6, Triple Aero Pro Max 15.6 Gen 2, Triple Aero Pro Max (Gen 2), triple monitor laptop