I installed the driver but the middle and right screens of my Triple Aero Pro Max 15.6" stay black on Windows

Short answer: Most often the wrong driver is installed for your unit, the power adapter isn't connected, or the cable or laptop port doesn't carry video. Check the points below in order.

On a Mac? See On my Mac, only one screen works.

1. Check that you installed the right driver

  • Red peel tab on the screens: you need DisplayLink.
  • No red tab: you need Silicon Motion (it installs as SMIUSBDisplay on Windows).
  • Tab already removed: install DisplayLink first. If the middle and right screens stay dark, install Silicon Motion instead.

Silicon Motion Display Software installer for Windows, with the INSTALL button.

2. Check the power

  1. Plug the white USB-C power cable into the monitor's PD port. The white cable is for power only.
  2. Plug the included 65 W adapter into a working wall outlet.
  3. Unplug your laptop's own charger before use, then reconnect the monitor. The monitor can charge your laptop through the USB-C video cable.

The power adapter is required however you connect the monitor: a laptop port can't supply enough power on its own.

3. Check the cables and the laptop port

  1. Unplug the cables and connect them again.
  2. Make sure both ends of each cable are fully connected.
  3. For USB-C, use the black full-featured USB-C cable from the box. A charge-only USB-C cable, or the white power cable, doesn't carry video.
  4. Only the middle and right screens work? Your laptop's USB-C port doesn't carry video. Keep the USB cable in and add an HDMI cable to the left HDMI port (the first one, next to PD).
  5. Using a dock or a hub? Connect the monitor straight to your laptop instead.
  6. Still nothing? Try the other connection method: USB-A to USB-C cable plus one HDMI cable in the first HDMI port.

USB cable in the TYPE-C port, power cable in PD, and one HDMI cable added in the first HDMI port to light up the left screen.

4. Check Windows display settings

  1. Open Settings › System › Display.
  2. Choose Extend these displays.
  3. Click Identify, drag the displays to match where the screens sit, then click Apply.

Windows Display settings showing three numbered screens to drag into place, with the Identify and Detect buttons

Still not working?

Contact us at aura-displays.com/pages/support and include:

  • a clear, steady video that shows the screens, the cables at both ends, and the driver installed and running (share it with a Google Drive, Dropbox, or WeTransfer link);
  • your computer model and Windows version;
  • your connection method, the cables you're using, your driver and its version, and whether your screens have a red peel tab.

We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).

Also searched as: driver installed but no display, screens detected but black, Windows sees 3 screens but black, middle and right screen black, monitor not detected, no image, SMI USB Display not working, SM driver 2.24, DisplayLink installed nothing happens, extra screens not working Windows 11, Triple Aero 15.6