My laptop has no USB-C port with video: how do I connect the Triple Aero Pro Max 15.6"?

Short answer: You can still use all three screens. Connect one USB cable (USB-A to USB-C, included) plus one HDMI cable (included) in the monitor's left HDMI port, and install the free driver. If your laptop has three HDMI outputs, you can use three HDMI cables instead.

Which setup is right for you?

  • Your laptop has a USB-C port with video: use one USB-C cable (option 1 in the setup guide). It's the simplest setup.
  • Your USB-C port is data-only, or you only have USB-A ports, plus one HDMI port: use Option 2 below.
  • Your laptop has three HDMI outputs: Option 3 below works too.

Not sure what your USB-C port supports? Check your laptop's specifications for video output on USB-C.

  1. Plug the white USB-C power cable into the monitor's PD port and the 65 W adapter into a wall outlet.
  2. Plug the USB-A to USB-C cable into the monitor's TYPE-C port and into a USB-A port on your laptop.
  3. Plug the mini HDMI to HDMI cable into the first HDMI port on the monitor (right next to PD) and into your laptop's HDMI port.
  4. Install the driver for your unit: red peel tab on the screens = DisplayLink; no tab = Silicon Motion; tab already removed = try DisplayLink first, then Silicon Motion.

USB-A to USB-C cable in the TYPE-C port, power cable in PD, and one HDMI cable in the first HDMI port next to PD.

The HDMI cable runs the left screen. The USB cable and the driver run the middle and right screens.

Option 3: three HDMI cables (no driver)

  1. Plug the white USB-C power cable into the monitor's PD port and the adapter into a wall outlet.
  2. Plug one HDMI cable into each of the monitor's three HDMI ports, and the other ends into your laptop.

Three mini HDMI to HDMI cables, one in each of the monitor’s HDMI ports, plus the power cable in PD.

Each HDMI cable runs one screen. The box includes one mini HDMI to HDMI cable, so you'll need two more.

Using a USB-C port that carries data but not video?

With the USB-C to USB-C cable only, the middle and right screens work but the left screen shows "No signal" or "Power saving". Add one HDMI cable to the first HDMI port, next to PD.

USB cable in the TYPE-C port, power cable in PD, and one HDMI cable added in the first HDMI port to light up the left screen.

Still not working?

Contact us at aura-displays.com/pages/support with a photo of the back of the monitor showing which cables are plugged in where, a photo of your laptop's ports, your laptop model, and which driver you installed.

We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).

Also searched as: no USB-C, USB-A only, data-only USB-C, no DP Alt Mode, no DisplayPort over USB-C, HDMI and USB, three HDMI cables, connect with HDMI, older laptop only 2 of 3 screens, left screen no signal, HP laptop USB-C no video, Triple Aero 15.6