Short answer: Lay the monitor flat, screens up. Open the left screen first, then the right one (up to 180°). Stretch the support to your laptop's width and clip it on. To fold it, close the right screen first, then the left.
Open it
- Lay the monitor flat with the screens facing up.
- Slowly open the left screen first.
- Then slowly open the right screen. The screens open up to a maximum angle of 180°.

Attach it to your laptop
- Pull the support open to the width of your laptop screen. It fits 14" to 17.3" laptops (14" means a laptop with a 16:9 screen). Smaller laptops can be placed behind the monitor.
- Open the support rod, then stretch the support to the right size.
- The support rod only rotates clockwise, by 90°. Its maximum opening angle is 90°: folding it further damages it.
- Clip the monitor onto the top of your laptop screen.

Fold it
- Lay the monitor flat with the screens facing up.
- Make sure the stand faces up and the wide edge of the screen faces down.
- Fold the right screen first, then the left screen.
- Make sure the small flap closes properly before you store the screens.

Safety tips
- Always follow the opening and closing sequence to avoid damaging the device.
- Don't press on the screens or use sharp tools near them. Remove the protective film before first use.
Still not working?
Contact us at aura-displays.com/pages/support with a photo of the monitor on your laptop. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).
Helpful links
- All Dual Air Max 15.3" help articles
- How do I set up my Dual Air Max 15.3"?
- Dual Air Max 15.3" user manual (PDF)
Also searched as: open, unfold, fold, close, clip on laptop, support rod, kickstand, outrigger, small flap, laptop size, Dual Air Max