Short answer: The Single Air Max 15.3" clips onto your laptop. If your laptop has a USB-C port that supports video, one USB-C cable from the box carries both video and power: no driver needed. For steady power, you can also plug a 5V/2A USB power adapter (not included) into the monitor’s other USB-C port.
Before you start
- Check your laptop's ports. A full-function USB-C port carries video, data, and power at the same time. Thunderbolt 3 and Thunderbolt 4 ports are full-function. Not sure? Check your laptop's specifications.
- Use the cables that came in the box. Not every USB-C cable carries video.
- Peel the protective film off the screen.
Unfold it and clip it onto your laptop
- Lay the monitor flat with the screen facing up.
- Open the screen in the direction shown in the manual, up to 180°.
- Open the support rod, then pull the support open to the width of your laptop screen.
- The support rod only turns clockwise, up to 90°. Forcing it further will damage it.
- Clip the monitor onto the top of your laptop screen, then adjust the kickstand.

How to connect it
The back of the monitor has USB-C port 1 and USB-C port 2 (full-function: video and power), plus USB-C port 3 (with DP), which is only for the HDMI to USB-C cable.

Use option 1 whenever your laptop allows it: one USB-C cable to your laptop, and the other cable to a USB power adapter. No software needed. If you don’t have a power adapter, option 2 (one USB-C cable alone) also works.
Option 1 (recommended): one USB-C cable to the laptop + a power adapter
For laptops with a full-function USB-C port.
- Plug the USB-C to USB-C cable into USB-C port 1 on the monitor, and the other end into a full-function USB-C port on your laptop. This cable carries video.
- Plug the USB-A to USB-C cable into USB-C port 2 on the monitor, and into a 5V/2A (10 W) or higher USB power adapter (not included). Plug the adapter into a wall outlet.
Option 2: one USB-C cable alone
For laptops with a full-function USB-C port.
- Plug the USB-C to USB-C cable into USB-C port 1 or USB-C port 2 on the monitor.
- Plug the other end into a full-function USB-C port on your laptop.
- The screen turns on. The cable carries both video and power. If the screen doesn’t light up or restarts, add a power adapter (option 1).

Option 3: USB cable + HDMI cable
For laptops without a full-function USB-C port, with a USB-A or USB-C port and an HDMI port.
- Plug the USB-C end of the HDMI to USB-C cable into USB-C port 3 on the monitor, and the HDMI end into your laptop's HDMI port. This cable carries video.
- Plug the USB-A to USB-C cable (or the USB-C to USB-C cable) into USB-C port 1 or USB-C port 2 on the monitor, and into a USB port on your laptop. This cable carries power.

Good to know: the HDMI to USB-C cable only works in USB-C port 3. If the screen shows no signal or the picture is unstable, connect a 5V/2A (10 W) or higher USB power adapter (not included) to the monitor.
Arrange your screens
Windows 10 or 11
- Right-click a blank area of the desktop and select Display settings.
- Under Rearrange your displays, drag the screens to match where they sit on your desk.
- Scroll down to Multiple displays and choose Extend these displays (or duplicate, to mirror).
macOS
- Choose Apple menu › System Settings, then click Displays.
- Select the Single Air and choose whether to extend or mirror your display, and the resolution you want (1920 × 1200 by default).
- Click Arrange… and drag the screens to match where they sit on your desk. To mirror, hold the Option key while you drag one screen onto the other.
Choose where the sound plays
- Windows: right-click the speaker icon on the taskbar, select Open Sound settings, then choose Single Air or your laptop speakers as the output device.
- macOS: open System Settings › Sound › Output and choose Single Air or your Mac speakers.
Buttons and on-screen menu
The multi-function button works like a small joystick: press it, or push it left or right.
- Press: open the menu, select, confirm.
- Press and hold 2 seconds: go back.
- Press and hold 3 seconds: turn off.
- Push left (minus): brightness (backlight).
- Push right (plus): volume.
Fold it and carry it
- Unplug the cables. Always pull them straight out of the port, never at an angle.
- Lay the monitor flat with the stand facing up and the wide edge of the screen facing down.
- Fold the screen in.
- Make sure the small flap closes properly before you store the screen. Otherwise, you could damage the display.
- Slide it into the carry bag from the box.
Use the monitor between -4 °F and 140 °F (-20 °C and 60 °C), and keep it away from moisture and dust.
Still not working?
Check the troubleshooting article in all Single Air Max 15.3" help articles, or reach out to our support team at aura-displays.com/pages/support and include:
- a photo or short video of the screen, and of the back of the monitor showing which cables are plugged in where;
- your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 15, Windows 11);
- which cables you're using and which laptop ports they go into.
Helpful links
- All Single Air Max 15.3" help articles
- Single Air Max 15.3" user manual (PDF)
- Single Air Max 15.3" Quick Start (PDF)
- Single Air Max 15.3" product page
- Driver: none needed. It's plug and play.
Also searched as: how to set up, how to connect, how to install, which cable, one cable, USB-C port 3, DP port, HDMI not working, clip on laptop, attach to laptop, unfold, fold, support rod, kickstand, extend display, mirror display, sound, speaker, brightness, Single Air Max, Single Air Max 15.3, Single Air 15.3, portable monitor laptop extender