Short answer: This usually comes down to how your Triple Aero Pro Max 15.6" is connected, or to the free driver it needs. Find what you see below and follow the steps.
Before you start
- Plug the monitor into its power adapter: the white USB-C power cable goes into the PD port, and the adapter goes into a wall outlet. The Triple Aero Pro Max 15.6" needs outside power however you connect it, because a laptop port can’t supply enough. Use the 65 W adapter that came in the box.
- Use the cables that came in the box. Not every USB-C cable carries video.
How it should be connected
The ports on the back of the monitor are, in order: TYPE-C, PD (power), then three HDMI ports. There are three ways to connect it.
Use option 1 whenever your laptop allows it. It’s the simplest setup: one cable to your laptop, one cable to the power adapter.
Option 1 (recommended): one USB-C cable
For laptops with a USB-C port that supports video. One cable runs all three screens.
- Plug the black 3.3 ft (1 m) USB-C to USB-C video cable into the monitor’s TYPE-C port.
- Plug the other end into your laptop’s USB-C port.
- Plug the white power cable into the monitor’s PD port, and the power adapter into a wall outlet.

Option 2: one USB-A cable + one HDMI cable
If your laptop’s USB-C port doesn’t support video, or your laptop only has USB-A ports.
- Plug the USB-A to USB-C cable into the monitor’s TYPE-C port and into a USB-A port on your laptop.
- Plug the HDMI cable into the first HDMI port on the monitor, right next to PD, and into your laptop’s HDMI port.
- Plug the white power cable into the monitor’s PD port, and the power adapter into a wall outlet.

Option 3: three HDMI cables
Only if your laptop has three HDMI outputs.
- Plug one HDMI cable into each of the monitor’s three HDMI ports, and the other ends into your laptop. The box includes one mini HDMI to HDMI cable, so you’ll need two more.
- Plug the white power cable into the monitor’s PD port, and the power adapter into a wall outlet.

Not sure what your USB-C port supports? Check your laptop’s specifications for video output on USB-C.
Only the left screen works
The left screen is the one that works without a driver. The middle and right screens need the driver.
-
Install the right driver. Depending on when it was made, your monitor uses one of two free drivers. Here’s how to tell which one:

- Your screens have a red peel tab that reads “Looking for your tempered glass protector?” (like the one above): your monitor uses DisplayLink. Download it for Windows 10 or 11, macOS, or Ubuntu 20.04, 22.04, or 24.04.
- No red tab on your screens: your monitor uses Silicon Motion. Download it for Windows, macOS, or Ubuntu.
- Already peeled the tab off and not sure? Install DisplayLink first. If the middle and right screens stay dark, install Silicon Motion instead.
Run the installer, follow the prompts, then plug the monitor back in. On a work computer, your IT team may need to approve the install.
-
On a Mac, allow screen recording. Open System Settings › Privacy & Security › Screen & System Audio Recording and turn on the driver’s app: DisplayLink Manager or macOS InstantView (Silicon Motion). Without this permission, macOS keeps the extra screens dark.

-
Using only one HDMI cable? One HDMI cable runs one screen. Switch to option 1 if your laptop’s USB-C port supports video, otherwise to option 2 (see above).
Good to know for Mac users: with the driver installed, all three screens work on every Apple silicon Mac, including base M1, M2, and M3 models, which normally support only one external display.
Only the middle and right screens work (the left screen says "No signal" or "Power saving")
Your laptop’s USB-C port sends data but not video, so the left screen gets no signal, then goes into power saving.
- Keep the USB cable plugged in.
- Add one HDMI cable from your laptop to the first HDMI port on the monitor, next to PD.

Only the middle screen, or only the right screen, works
An HDMI cable plugged into the middle or right HDMI port lights up that screen only. Fix it one of these ways:
- Switch to option 1 (one USB-C cable), or
- Use option 3: three HDMI cables, one per screen.
None of the screens turn on
- Check that the power adapter is plugged into the monitor’s PD port and into a working outlet.
- Press and hold the Menu/Power button for 2 to 3 seconds to turn the monitor on.
Still not working?
Reach out to our support team at aura-displays.com/pages/support and include:
- a photo or short video of the screens, and of the back of the monitor showing which cables are plugged in where;
- your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 13, Windows 11);
- which cables you’re using, which laptop ports they go into, and which driver you installed.
Helpful links
- All Triple Aero Pro Max 15.6" help articles
- Triple Aero Pro Max 15.6" user manual (PDF): see “Troubleshooting”
- Triple Aero Pro Max 15.6" product page
- DisplayLink driver (red peel tab on the screens): Windows · macOS · Ubuntu
- Silicon Motion driver (no red tab): Windows · macOS · Ubuntu
Also searched as: only one screen works, one monitor not working, 2 screens not working, second and third screen black, middle screen not working, right screen not working, left screen only, extra screens not detected, no signal, power saving, left screen no signal, triple screen not working, extended display not working, how to connect, which cable, one cable setup, DisplayLink not working, DisplayLink Manager, Silicon Motion, SM770, InstantView, which driver, wrong driver, red sticker, red tab, tempered glass sticker, screen recording permission, Triple Aero 15.6, Triple Aero Pro Max 15.6 Gen 2, Triple Aero Pro Max (Gen 2), Triple Aero 15.6 inch, triple monitor laptop