Home Product Information

Product Information

Here you will find essential details about meraki.'s range, including information on our made-to-order products, materials used, care instructions, understanding sizes and measurements, customisation options, product availability, and how to request product samples. We're dedicated to transparent and thorough product information to help customers make informed purchase decisions.
12 articles

Understanding IP Ratings for our lights

Learn about the IP20 rating of our lights and what it means for bathroom use. Lighting fixtures are rated based on their resistance to dust and water. At meraki., all our lights are rated IP20. But what does this mean for you, especially if you're planning to install them in a bathroom? The IP rating is a two-digit grading system. The first digit refers to the fixture's resistance to solid objects and dust, and the second digit indicates resistance to water. An IP20 rating means that the lighting fixture is protected against solid objects larger than 12.5mm (such as fingers), but not against water. When it comes to bathroom installation, it's crucial to understand the different zones, as each has specific requirements for lighting safety. - Zone 0: Inside the bath or shower itself. Any fitting used here must be low voltage and be rated at least IP67, which is total immersion proof. - Zone 1: Above the bath or shower to a height of 2.25m from the floor. A minimum rating of IP45 is required here. - Zone 2: The area stretching 0.6m outside the perimeter of the bath and to a height of 2.25m from the floor. An IP rating of at least IP44 is needed here. IP rating zone guide for bathrooms Any area outside of zones 0, 1, and 2 is classified as zone 3, where no IP rating is required. Therefore, while meraki. lights cannot be used in zones 1 and 2, they are perfectly safe and suitable for use in zone 3 areas of your bathroom. Remember, if you're ever in doubt about where to install your lights safely, consult with a qualified electrician to ensure your safety.

Last updated on Jun 05, 2025

About our made-to-order products

Learn about meraki.'s made-to-order process, its benefits, and our commitment to responsible manufacturing. Made-to-Order at meraki. At meraki., many of our products are made-to-order. This allows us to provide you with a broad range of designs, finishes, and personalisation options that wouldn't be possible with off-the-shelf products. But there's more to it than just offering variety. Our made-to-order approach is a conscious decision that forms an integral part of our commitment to responsible manufacturing. The Made-to-Order Process Once your order is placed, it goes straight to our skilled technicians who begin the process of crafting your product. This process involves meticulous attention to detail, ensuring that your item meets the high standards meraki. is renowned for. Since these items aren't mass-produced, you're receiving a product that's been given the individual care and attention it deserves. Behind the Scenes Delivery Times Due to the nature of the made-to-order process, delivery times are longer. We typically ask customers to allow approximately 4-6 weeks from the date of order. This time allows us to ensure that your product is crafted to the highest quality standards that meraki. is known for. Commitment to Responsible Manufacturing Our made-to-order approach is rooted in sustainability. By producing items only when they're ordered, we're able to significantly reduce waste and overproduction. This conscious choice reflects our commitment to responsible manufacturing practices. Value of Made-to-Order Made-to-order products offer several advantages: - Quality: Each product is made with meticulous attention to detail, ensuring the highest quality. - Personalisation: The made-to-order approach allows us to offer a wider range of finishes and customisation options. - Sustainability: By producing products only when ordered, we reduce waste, reflecting our commitment to sustainability. Ordering Made-to-Order Products Ordering made-to-order items is as simple as ordering any other product on our site. If a product is made-to-order, this will be clearly indicated on the product page.

Last updated on Jun 05, 2025

Where our products are made

Gain insight into the origin and craftsmanship behind your meraki. products. At meraki., we hold a commitment to quality craftsmanship, responsible manufacturing, and ethical sourcing of materials. We're proud to say all our products are made in China, in partnership with manufacturers who share these values. We use the finest grade of lead-free brass in our products. This not only ensures their longevity and durability, but also is safer for you and the environment. Brass, with its distinctive warmth and lustre, brings an exceptional quality to each piece that simply cannot be replicated. Behind the Scenes Our manufacturers follow rigorous standards for quality and conduct regular tests to ensure the highest level of craftsmanship. The partnership goes beyond a simple business relationship, as they share our commitment to reducing waste and implementing sustainable practices. We know trust is earned, and we take great care in ensuring the integrity of our products through regular reviews of our manufacturing processes. We maintain an open dialogue with our partners, valuing your trust and working tirelessly to uphold the high standards that have made meraki. a trusted name in the industry. We are grateful for your understanding and support as we continue to provide you with high-quality products, mindfully made with precision and care. If you have any further queries or concerns regarding our manufacturing process or materials used, feel free to reach out to us.

Last updated on Jun 05, 2025

Understanding Hole-to-Hole Centres (cc) for cabinet handles and knobs

Get to grips with what hole-to-hole centres mean and why it's important for your cabinet hardware. What Does 'Hole-to-Hole Centre' Mean? When choosing handles or knobs for your cabinets, one critical measurement is the 'hole-to-hole centre' - often abbreviated as 'cc'. This term refers to the distance from the centre of one screw hole to the centre of the other. Why is this Measurement Important? The cc measurement is vital because it ensures that your new hardware aligns perfectly with the pre-drilled holes in your cabinet doors or drawers. meraki.'s Commitment to Accuracy At meraki., we provide the cc measurement for each product under its specifications to assist you in making the best choice for your cabinet needs.

Last updated on Jun 05, 2025

Attaching your cabinet handles or knobs

This guide provides a step-by-step process for installing your new cabinet handles or knobs. Installing new cabinet hardware can refresh the look of your room without the need for a complete renovation. At meraki., we make this process as straightforward as possible. Here's a step-by-step guide on how to attach your new cabinet handles or knobs: 1. Prepare the necessary tools. Typically, you'll need a screwdriver or drill, as well as the screws provided with your meraki. handles or knobs. 2. Align the hardware. Position your new handle or knob over the pre-drilled holes on your cabinet door or drawer. 3. Secure the hardware. Insert the screws from the inside of the cabinet door or drawer, ensuring they align with the holes of your new handle or knob. Tighten until secure, but be careful not to overtighten. Remember, if your cabinets don't already have pre-drilled holes, you'll need to measure and mark where you'd like your new hardware to go. Always double-check your measurements before drilling new holes.

Last updated on Jun 05, 2025

How to install house numbers

Learn how to install your new meraki. house numbers with our step-by-step guide. Whether you've opted for a fresh new look or you're just moving in, meraki. house numbers are the perfect way to make your home stand out. Here's a simple guide to installing your house numbers: 1. Gather Your Tools. You'll need a drill, screwdriver, tape measure, level, and the mounting hardware included with your meraki. house numbers. 2. Measure and Mark. Decide where you'd like your house number to go and mark this on your wall using the measuring tape and level to ensure proper alignment. 3. Drill Holes. Drill holes where you've marked, taking care to follow the size specifications provided with your meraki. house numbers. 4. Secure the Numbers. Position your house number over the drilled holes and insert the screws, tightening until secure. We have an installation guide graphic for this as well. For further guidance, consult this before starting your installation process.

Last updated on Jun 05, 2025

Customisation options

At meraki., we are proud to offer customisation options for most of our products, from size variations to finish choices. Cabinet Handles and Knobs Customisation For cabinet handles and knobs, we offer customisation options, however, they require a minimum order quantity of at least 100 pieces per style and finish. This is due to the intricate processes and resources involved in creating these unique pieces. Lighting Customisation When it comes to our lighting range, we're a lot more flexible. You can customise numerous aspects, including how many lights you want on a pendant cluster, cable length, and cable colour amongst other design options. These customisable features allow you to create a lighting solution that perfectly illuminates your space. House Numbers and Signage Customisation For house numbers and signage, we offer vast customisation possibilities. We can create any letter and number sizes and styles, and we're even happy to use your own font if you have a specific one in mind. Whether you need large, bold numbers for a commercial building or subtle, stylish letters for a residential property, our custom options have got you covered. How to Request Customisation To inquire about customisation options, please contact our team with your specific requirements. We'll guide you through the process, providing you with a quote and time estimate. With meraki., creating a custom piece that matches your vision has never been easier.

Last updated on Jun 05, 2025

Requesting product samples

meraki. offers sample kits to help our customers choose the perfect finishes for their projects. Sample Finish Kits Our sample finish kits include brass tiles with all of our signature finishes, providing a hands-on way to see and feel our product quality. You can purchase our sample finish kits here. Individual Samples In some cases, customers may request individual sample pieces at a reduced rate. Please contact our sales team for further information.

Last updated on Jun 05, 2025

Material and care information

All meraki. products are crafted from high-quality materials that require proper care to ensure their longevity. Materials Used At meraki., we utilise the finest grade of brass and metals for our products, ensuring both the quality and longevity of your chosen items. You can find the material composition in the product specifications tab on the product pages. Caring for Your Products Our products are designed for durability, but to maintain their appearance, they should be cleaned gently with a soft, dry cloth. Abrasive cleaners or harsh chemicals should be avoided. You can find the specific care guide for each product finish on the product page under the care guide tab. Lacquered Finishes Some of our products, like taps, are lacquered to protect them from oxidisation. These require special care and should never be polished.

Last updated on Jun 05, 2025

Understanding sizes and measurements

At meraki., we provide detailed measurements for all our products to ensure they meet your project's specific needs. Product Measurements Each product page on our website features detailed measurements. These dimensions are provided to ensure the item will fit your specific needs. Custom Sizes In addition to our standard sizes, we offer custom sizing for many of our products. Minimum order quantities may apply for some product categories or ranges. Please reach out to our customer service team to discuss your specific needs.

Last updated on Jun 05, 2025

A Guide to Selecting Door Hardware

DUMMY SET Doesn't include locking hardware or a latch. Generally used on unused double doors, wardrobes, or doors with edge latches.* PASSAGE SET Includes non-locking latch mechanism for internal doors. Generally used for internal passageways where privacy isn't required.* PRIVACY SET (WITH SNIB) Includes a privacy deadbolt with emergency release for internal doors. Generally used for bathrooms, bedrooms, or changing rooms.* PRIVACY SET (ROSE BUTTON) Includes a built-in button on the non-locked side (location of the button by request) which when pushed, releases the latch. Can be unlocked from external side in emergencies. Generally used for internal passageways where privacy is required.* ENTRY SET (MORTICE KEY LOCK) Includes heavier duty security locket for both internal and external doors. Generally used for both internal or external entrances.* ENTRY SET (MORTICE THUMB TURN LOCK) Includes heavier duty security lock with interior thumb turn mechanism for both internal and external doors. Provides quick locking and unlocking from inside without requiring a key. Generally used for both internal or external entrances where convenient access is needed.* View the full step-by-step guide

Last updated on Jun 11, 2025

Finish & Care Guide

Understanding the character and care of meraki.'s solid brass hardware finishes The Character of Brass At meraki., we believe in the enduring beauty of solid brass. Each piece in our hardware range is crafted from solid brass, chosen for its depth, richness, and exceptional durability. This material forms the foundation for finishes that bring both character and longevity to your spaces. Most of our finishes are permanently sealed using advanced electroplating or PVD processes, ensuring consistent appearance over time. However, one finish stands apart: Unlacquered Brass is a living finish, designed to evolve naturally with use and age. The subtle changes in patina, tone, and texture that develop over time aren't flaws — they're part of the intended aesthetic, adding unique character that can't be replicated. Understanding your chosen finish helps you care for it properly and appreciate its individual qualities as it settles into your home. View the full finish-by-finish guide

Last updated on Jun 11, 2025