How do I take out, mount, and store my Single Fly Max 16" safely?

For the full setup, see How do I set up my Single Fly Max 16"?

Short answer: Hold the suction cup and slide the tray out to the bottom right, lift the screen out, open the stand, and attach the screen to it. To store it, fold the stand, slide the tray out to the bottom left, and insert the screen facing down.

Take out the screen

  1. Hold the suction cup and slide it along the track to the bottom right to pull out the sliding tray.
  2. Pull the sliding tray apart to remove the screen.

Single Fly Max 16" from the user manual: hold the suction cup, slide the tray to the bottom right, then lift the screen out

Unfold the screen step by step to avoid damaging it.

Open the stand and install the screen

  1. Open the stand. The maximum opening angle is 90°.
  2. Align the screen's mounting holes with the stand to install the screen.
  3. Slide the screen up or down: the travel is 3.5 in (90 mm).
  4. Rotate the screen up to 360° to switch between landscape and portrait.

Single Fly Max 16" stand from the user manual: open up to 90°, align the holes, slide up or down 3.5 in (90 mm), rotate the screen 360°

  • Above your laptop: place the stand behind your laptop to raise the screen above the laptop screen.
  • Portable single-screen stand: once detached, the screen can also stand on the included portable stand, in landscape or portrait.

Store the monitor

  1. Remove the screen from the stand, then fold the stand.
  2. Hold the suction cup and slide it along the track to the bottom left to pull out the sliding tray.
  3. Align the clips and insert the screen facing down.
  4. Close the extension plate.

Single Fly Max 16" storage steps from the user manual: remove the screen, fold the stand, insert the screen facing down, close the extension plate

Safety tips

  • Don't apply force to the screen or use sharp tools near it.
  • Unplug the cables straight out before you store the monitor. Don't pull on the cable or bend the connector.
  • Remove the protective film from the screen before first use.

Still not working?

Contact us at aura-displays.com/pages/support with a photo or short video of the stand or tray. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).

Also searched as: take out screen, suction cup, sliding tray, stand, mount, rotate, portrait, height, fold, store, transport, Fly Max