How do I unfold, mount, and fold my Single Fly 24" safely?

Short answer: Lift the screen off the stand, open the stand, and attach the screen to the magnetic mount. Always slide the screen to the top of the stand before you rotate it or remove it, and store it in the order below.

Unfold and mount the screen

  1. Lift the screen in the direction shown in the manual, then lift it off the stand. A blue dot in the manual shows where the screen detaches.
  2. Unfold the foldable stand.
  3. Open the stand (opening angle 0 to 75°). For tabletop use, fold the handle to about 70°.
  4. Align the screen's mounting holes with the magnetic mount of the stand, and secure the screen in place.
  5. Adjust the height: the screen holds at any height from 0 to 5.7 in (0 to 145 mm).

Single Fly 24" unfolding from the user manual: lift the screen, then lift it off the stand where the blue dot shows

Single Fly 24" stand from the user manual: unfold the foldable stand, then open it (0 to 75°) with the handle folded about 70° for tabletop use

Switch between landscape and portrait

  1. Slide the screen to the highest point of the stand. It can only rotate there.
  2. Rotate the screen to the left to switch to portrait. Rotate it back to return to landscape.

Fold and store the monitor

Always store the screen in this order to avoid damaging it:

Single Fly 24" storage steps from the user manual: back to landscape, face down, slide into the storage slot, flip the handle over

  1. Slide the screen to the top of the stand, rotate it back to landscape, and lift it off. Keep your hand away from the area shown in the manual.
  2. Place the screen face down.
  3. Align it and insert it into the storage slot on the left side of the stand.
  4. Once the screen is in place, flip the handle over and insert it into the slot on the screen's protrusion.

Safety tips

  • Slide the screen to the top of the stand before you remove it. This avoids injury or damage from the magnetic parts springing back.
  • Don't press on the screen or use sharp tools near it.
  • Unplug the cables before you fold the monitor, straight out and never at an angle.
  • Remove the protective film from the screen before first use.

Still not working?

If the screen won't rotate, slide it to the highest point of the stand first. Still stuck? Contact us at aura-displays.com/pages/support with a photo or short video of the stand. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).

Also searched as: fold, unfold, stand, magnetic mount, detach screen, height, portrait mode, rotate screen, won't rotate, store, transport, Fly 24