Which ports on my Dual Go 14" Ultra carry power and video, and which cable goes where?

Short answer: Each screen needs its own cable to your laptop. The USB-C ports carry video and power. The mini HDMI port carries video only, so a screen connected by HDMI also needs power through a USB-C port.

The ports on each screen

  • Two full-function USB-C ports: power and video.
  • One mini HDMI port: video only. It doesn't supply power.

Dual Go 14" Ultra ports on each screen: two full-function USB-C ports (power and video) and a mini HDMI port (video only)

The cables in the box

  • 2 × USB-C to USB-C cable, 23.6 in (60 cm): video and power.
  • 1 × USB-C cable with USB-A adapter, 35.4 in (90 cm): the USB-C end carries video and power, but the USB-A end carries power only. Use it to plug a screen into a 5V/2A power supply, not to send video from a USB-A port.
  • 1 × Mini HDMI to HDMI cable, 35.4 in (90 cm): video only.
  • No power adapter is included.

Which cable goes where?

First check your laptop's ports: a USB-C port must support video (DisplayPort over USB-C, or Thunderbolt 3/4) to run a screen. Use option 1 whenever your laptop allows it.

  1. Connect the left screen to one USB-C port on your laptop with a USB-C to USB-C cable.
  2. Connect the right screen to another USB-C port with the second USB-C to USB-C cable.
  3. Each screen needs at least 5V/2A. If your laptop's USB-C port can't supply it, or if you set the brightness above 50, add a 5V/2A power supply (not included) to that screen with the USB-C cable with USB-A adapter.

Dual Go 14" Ultra connected to a laptop with two USB-C to USB-C cables, one per screen

Option 2: one video USB-C port and one HDMI port

  1. Connect one screen to the laptop's USB-C port with a USB-C to USB-C cable.
  2. Connect the other screen to the laptop's HDMI port with the Mini HDMI to HDMI cable.
  3. Power that HDMI screen: plug the USB-C cable with USB-A adapter into one of its USB-C ports and into a 5V/2A (or higher) power supply (not included).

Dual Go 14" Ultra with one screen on USB-C and the other on HDMI plus external power

Option 3: two HDMI outputs

  • Each screen needs its own HDMI cable and its own power. The box has only one Mini HDMI to HDMI cable and one power cable, so you need a second set (not included).
  • A laptop with only USB-A ports can't run this monitor.

MacBook with a base M1, M2, or M3 chip?

These Macs drive only one external display, so only one of the two screens works, unless you add the H5T adapter (sold separately), which needs free software (driver). See How many screens will my Mac show?

Still not working?

See Dual Go 14" Ultra troubleshooting, or contact us at aura-displays.com/pages/support with a photo of your laptop's ports and of the cables plugged into the monitor. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).

Also searched as: which port, which cable, power port, video port, mini HDMI, USB-A, no signal, one cable per screen, Thunderbolt, DisplayPort, Dual Go 2.5K, Dual Play Gen 3, old Dual Play