How do I set up my Dual Go 14" Ultra?

Short answer: Unfold the two screens, then connect each screen to its own video port on your laptop: two USB-C cables are the easiest. No driver is needed, except to run both screens on a MacBook with a base M1, M2, or M3 chip.

Before you start

  • One cable per screen. Each screen connects to its own video port on your laptop: a full-function USB-C or Thunderbolt 3/4 port (video and power), or an HDMI port (video only). A laptop with only USB-A ports can’t run it.
  • Each screen needs at least 5V/2A. A full-function USB-C port usually supplies it. A screen connected by HDMI always needs its own power supply.
  • MacBook with a base M1, M2, or M3 chip (not Pro or Max)? These Macs drive only one external display, so only one screen will work unless you add the H5T adapter (sold separately).

Unfold the monitor

Handle it with care and don’t press on the screens. The left screen opens from 0° to 245° and flips 360°; the right screen opens from 0° to 205°. Never force a screen past its limit.

  1. Unpack the monitor.
  2. Open the right screen.
  3. Open the left screen.
  4. Rotate the left screen 180°.
  5. Place the monitor on the table, behind or beside your laptop.
  6. Lift up the stand for extra support.

Dual Go 14" Ultra unfolding steps from the user manual (figures 1 to 6): open the right screen, then the left screen, rotate it, and lift the stand

Connect it

Each screen has two full-function USB-C ports and one Mini HDMI port. The Mini HDMI port carries video only and doesn’t supply power. There are three ways to connect it.

Use option 1 whenever your laptop allows it: one USB-C cable per screen, and usually no power adapter at all.

For laptops with two full-function USB-C or Thunderbolt 3/4 ports (video and power).

  1. Plug one USB-C to USB-C cable into the left screen and into a USB-C port on your laptop.
  2. Plug the second USB-C to USB-C cable into the right screen and into another USB-C port on your laptop.

Add power if a screen flickers or turns off, or if you set the brightness above 50: plug the USB-C end of the cable with the USB-A adapter into that screen’s free USB-C port, and the USB-A end into a 5V/2A (or higher) USB power adapter (not included).

Dual Go 14" Ultra connected with two USB-C to USB-C cables: one cable from the laptop to each screen

Option 2: one USB-C cable + one HDMI cable

For laptops with one full-function USB-C port and one HDMI port.

  1. Connect one screen to your laptop’s USB-C port with a USB-C to USB-C cable.
  2. Connect the other screen to your laptop’s HDMI port with the Mini HDMI to HDMI cable.
  3. Power the HDMI screen: plug the cable with the USB-A adapter into that screen’s USB-C port and into a 5V/2A (or higher) USB power adapter (not included).

Dual Go 14" Ultra connected with one USB-C cable to one screen, and a mini HDMI to HDMI cable plus external power to the other screen

Option 3: two HDMI cables

For laptops with two HDMI outputs and no full-function USB-C port.

  1. Connect each screen to an HDMI port on your laptop with a Mini HDMI to HDMI cable. The box includes one, so you’ll need a second one.
  2. Power each screen through one of its USB-C ports with a USB-C to USB-A cable and a 5V/2A (or higher) USB power adapter. The box includes one power cable and no power adapter.

No HDMI port on your laptop? Use another video output (DisplayPort, Mini DisplayPort…) with a simple HDMI adapter (not included). Not sure what your USB-C ports support? Some USB-C ports carry no video: check your laptop’s specifications.

Do I need a driver?

  • Windows, macOS, and Ubuntu: no. It’s plug and play.
  • MacBook with a base M1, M2, or M3 chip: only one screen works on its own. To run both, add the H5T adapter (sold separately), which uses the free Silicon Motion app for macOS.

Arrange your screens

Windows

  1. Open Start › Settings › System › Display.
  2. Click Identify to see which number is which screen, then drag the screens to match where they really are.
  3. Select a screen and choose a mode in Multiple displays (for example, Extend these displays).
  4. If a screen is upside down, select it, open Display orientation, and choose Landscape (flipped).
  5. Keep the resolution at 2560 × 1600 (Recommended). To enlarge everything, set Scale to 150%.

macOS

  1. Open System Settings › Displays (System Preferences on older macOS).
  2. Click a monitor name and set it as Extended display, or mirror another display.
  3. Click Arrange… and drag the screens to match where they really are.
  4. To turn a screen, choose an option in Rotation.

Use the on-screen menu (OSD)

  • Press + or – to change the brightness.
  • Press M to open the menu, + to choose a setting, M to confirm, and long-press M to go back.
  • Useful settings: Source (Type-C1, Type-C2, or HDMI), Low blue light, HDR mode, Language, and Reset (factory settings).

Dual Go 14" Ultra buttons on the side of a screen: M (MENU), + and –

Fold it away

  1. Rotate the left screen back 180°.
  2. Fold the two screens.
  3. Store the folded monitor carefully. The shell scratches more easily than our other models, so keep it in a sleeve when you travel.

Still not working?

See the Dual Go 14" Ultra troubleshooting article, or reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screens and of the cables plugged into each screen;
  • your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 13, Windows 11);
  • which cables you’re using and which laptop ports they go into.

Also searched as: how to set up, how to connect, which cable, two USB-C cables, HDMI, mini HDMI, power supply, 5V 2A, unfold, fold, stand, display settings, extend, mirror, upside down, OSD menu, brightness, 2560 x 1600, QHD, 2.5K, Dual Play, Dual Play Gen 3, Dual Play (Gen 3) 14" Ultra, Dual Play 14 Ultra, dual screen laptop monitor