Dual Go 14" Ultra troubleshooting: only one screen works, flicker, no signal

Short answer: Most problems come from the laptop’s ports (each screen needs its own video port), from missing power on a screen, or from a base M1, M2, or M3 MacBook, which drives only one external display. Find what you see below and follow the steps.

Only one screen works

  1. MacBook with a base M1, M2, or M3 chip (not Pro or Max)? These Macs drive only one external display, so only one screen can work. To run both, add the H5T adapter (sold separately) and install its free Silicon Motion app for macOS. M1, M2, and M3 Pro or Max chips, and every M4 or M5 chip, run both screens without it.
  2. Give each screen its own cable and its own laptop port. One cable runs one screen.
  3. Use video ports only. USB-A ports don’t carry video, and some USB-C ports don’t either. If a USB-C port gives no picture, try your laptop’s other USB-C port, or connect that screen with the Mini HDMI to HDMI cable instead (option 2 in the setup article).
  4. Screen connected by HDMI? The Mini HDMI port doesn’t supply power. Plug the cable with the USB-A adapter into that screen’s USB-C port and into a 5V/2A (or higher) USB power adapter (not included).
  5. Check the input. On the dark screen, press M, go to Source, and choose the port you’re using: Type-C1, Type-C2, or HDMI.

Dual Go 14" Ultra ports on each screen: two full-function USB-C ports (power and video) and a mini HDMI port (video only)

A screen flickers, dims, or turns off

Each screen needs at least 5V/2A. Some laptop USB-C ports can’t supply it, especially when the brightness is above 50.

  1. Plug the USB-C end of the cable with the USB-A adapter into the screen’s free USB-C port.
  2. Plug the USB-A end into a 5V/2A (or higher) USB power adapter (not included).
  3. Or lower the brightness with the – button.

A screen is stuck on solid red, green, or blue

The screen went into its factory test mode, usually because it didn’t get enough power the first time you plugged it in. Plug the cable with the USB-A adapter into the screen’s free USB-C port and into a USB power adapter of at least 15 W (not included), then follow the steps in My screen flickers, won't turn on, or is stuck on solid red, green, or blue.

A screen shows “No signal”

  1. Unplug the cable at both ends and plug it back in firmly.
  2. Check that the laptop port carries video (see “Only one screen works” above).
  3. On that screen, press M › Source and choose the right input.
  4. On HDMI, make sure the screen also has power.

Both screens show the same picture

  • Windows: open Settings › System › Display, select each screen, and choose Extend these displays in Multiple displays.
  • macOS: open System Settings › Displays, click each Dual Go screen, and set it as Extended display instead of Mirror.

A screen is upside down, blurry, or in the wrong place

  • Upside down on Windows: select the screen in Settings › System › Display, open Display orientation, and choose Landscape (flipped).
  • Upside down on a Mac: select the screen in System Settings › Displays and change Rotation.
  • Picture looks soft: set the resolution to 2560 × 1600 (Recommended on Windows, Default on Mac).
  • Mouse goes off the wrong edge: click Identify (Windows) or Arrange… (Mac) and drag the screens to match where they really are.
  • Text too small: on Windows, set Scale to 150%.

The picture or menu looks wrong

Press M, go to Reset, and confirm to go back to the factory settings.

Still not working?

Reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screens and of the cables plugged into each screen;
  • your laptop model, its chip (for example, M2 or M2 Pro), and operating system version;
  • which cables you’re using and which laptop ports they go into;
  • a screenshot of your display settings.

Also searched as: only one screen works, second screen not working, one monitor black, MacBook Air M1 only one screen, M2, M3, two external displays Mac, H5T adapter, no signal, flickering, screen turns off, dim, not enough power, HDMI no power, both screens same image, mirror, extend, upside down, blurry, resolution, wrong order, source, OSD reset, Dual Play, Dual Play Gen 3, Dual Play (Gen 3) 14" Ultra, Dual Play 14 Ultra, red screen, green screen, blue screen, factory mode, test mode