Short answer: Most problems come from power, from the cable or port you’re using (HDMI tops out at 60 Hz at 4K, DisplayPort reaches 75 Hz), or from the stand version you have. Find what you see below and follow the steps.
No picture at all
- Check that the 48 W adapter is plugged into the monitor’s DC power input and into a grounded wall outlet.
- Press the Power button under the front frame.
- Check that the cable goes from your computer’s graphics card (or video port) to one of the monitor’s HDMI or DisplayPort ports.
- Open the menu with M and choose the input you’re using as the source.
- Press A (Auto) to adjust the display automatically.
My USB-C laptop shows nothing
- The monitor has no USB-C input. Use a USB-C to HDMI or USB-C to DisplayPort cable (not included).
- Your laptop’s USB-C port must carry video. Check your laptop’s specifications.
It’s stuck at 60 Hz, or the picture isn’t 4K
- For 75 Hz at 4K: use DisplayPort with a DisplayPort 1.2 cable. HDMI is limited to 60 Hz at 4K.
- For 4K at 60 Hz over HDMI: use an HDMI 2.0 Premium High Speed cable.
- Then set the resolution to 3840 × 2160 and the refresh rate in your computer’s display settings.
No sound from the monitor
The monitor has no built-in speakers. Plug headphones or speakers into its 3.5 mm audio jack, and adjust the volume in the menu.
The stand won’t go up or down, or won’t turn
- Black version: the stand is fixed. It only tilts 5° forward and 20° back, with no height adjustment or rotation.
- Color versions: the stand adjusts in height, swivels 360°, and turns the screen to portrait.
- Stand feels loose? Check that it’s pushed fully into the back of the monitor, and rock it gently to make sure it’s fixed.
There’s a film on the screen
That’s the polarizer layer, part of the screen, not a protective film. Don’t peel it off: that would damage the monitor and void the warranty.
Still not working?
Don’t open the monitor or try to repair it yourself. Reach out to our support team at aura-displays.com/pages/support and include:
- a photo or short video of the screen and of the cables plugged into the back;
- your computer model and operating system version;
- which cable you’re using and your monitor’s version (Black or color).
Helpful links
- All Home Desk 27" Infinity help articles
- Home Desk 27" Infinity user manual (PDF)
- Home Desk 27" Infinity product page
Also searched as: no picture, black screen, no signal, won’t turn on, USB-C not working, MacBook USB-C, 75Hz not available, stuck at 60Hz, not 4K, blurry, resolution, refresh rate, HDMI 2.0, DisplayPort 1.2, no sound, speakers, headphone jack, height adjustment, swivel, portrait, black version, stand loose, peel film, screen protector, Home Desk 27, 27 inch 4K monitor