Single Fly 24" (Full HD) troubleshooting: no signal, dim or black screen, USB devices, and more

Short answer: Check the power first: the Single Fly 24" always needs its 30 W power adapter. Then check the video cable and your laptop’s port. Find what you see below and follow the steps.

Before you start

  1. Plug the included 30 W power adapter into one of the monitor’s USB-C ports with the USB-C to USB-C (power only) cable, and into a wall outlet. A laptop port can’t power this monitor. Another power source must deliver 30 W PD or more.
  2. Use the cables that came in the box. Not every USB-C cable carries video: many only charge.

Back of the Single Fly 24 with its USB-A ports, buttons, AUX 3.5 mm jack, two USB-C ports, Mini HDMI port, and VESA mounting holes labeled

The screen shows “No signal”

  1. Check that the power adapter is connected (see above).
  2. Make sure your video cable is the included USB-C to USB-C cable, plugged into the monitor’s other USB-C port. A charging-only cable shows the startup logo, then “No signal.”
  3. Push the cable in all the way at both ends.
  4. Plug it into a full-featured USB-C port on your laptop. Full-featured ports usually show a DisplayPort or Thunderbolt symbol; Thunderbolt 3 and 4 ports are full-featured. If your laptop has several USB-C ports, try another one.
  5. Your laptop’s USB-C port doesn’t support video? Connect with the HDMI to Mini HDMI cable instead, and keep the power adapter plugged in.

Single Fly 24 connected to a laptop with the HDMI to Mini HDMI cable, with the 30 W power adapter plugged into the monitor

Symbols that mark a full-featured USB-C port on a laptop: Thunderbolt, SuperSpeed USB with DisplayPort, and DisplayPort

The screen doesn’t light up, or it’s dim

  1. Your laptop alone can’t supply enough power. Connect the included 30 W PD adapter, or another power source that provides 30 W PD or more.
  2. Once the adapter is connected, press the – button to adjust the brightness.

A mouse, keyboard, or drive on the USB-A ports doesn’t work

  1. Connected with HDMI? Also connect one of the monitor’s USB-C ports to a USB-A port on your computer with the USB-A to USB-C cable. Without it, the USB-A ports don’t transfer data.
  2. Device doesn’t fit? Use one of the included USB-A male to USB-A female adapters.

The screen won’t rotate

  1. Slide the screen to the highest point of the stand first. It can only rotate there.
  2. Then turn it to portrait. Always slide it to the top before removing it from the stand, too.

No sound from the monitor

  1. Press the + button to turn the volume up.
  2. Select the monitor as your sound output: on Windows, right-click the speaker icon › Sound settings › Output › Single Fly. On a Mac, System Settings › Sound › Output › Single Fly.

The monitor shows the same image as my laptop (or I want it to)

  • Windows 10 or 11: right-click the desktop › Display settings, then under Multiple displays choose Extend these displays or Duplicate these displays.
  • macOS: System Settings › Displays, select the monitor, and choose to extend or mirror.

Still not working?

Please contact us at aura-displays.com/pages/support and include:

  • a short video of what happens when you plug in the monitor, and a photo of the cables plugged into its back;
  • your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 13, Windows 11);
  • which cables you’re using, which laptop ports they go into, and which power adapter you’re using.

Also searched as: no signal, logo then no signal, black screen, won’t turn on, screen doesn’t light up, dim screen, not enough power, power adapter, 30W, USB-C not working, USB 3 not working, charging only cable, wrong cable, full-featured USB-C, DisplayPort symbol, Thunderbolt, HDMI not working, USB-A not working, mouse not working, flash drive doesn’t fit, won’t rotate, portrait, no sound, volume, mirror instead of extend, Single Fly 24, Single Fly 24 Gen 1, Fly 24 inch