How do I set up my Home Desk 27" Infinity?

Short answer: Click the assembled stand into the back of the monitor, connect your computer with one HDMI or DisplayPort cable, and plug in the 48 W power adapter. No driver is needed.

Before you start

  • No software to install. It’s plug and play.
  • It needs external power: the included 48 W power adapter (12 V, 4 A).
  • Two versions: the Black version has a fixed stand that tilts from −5° to +20°. The color versions adjust in height, swivel 360°, and turn to portrait.

Assemble the stand

  1. Take the stand and the base out of the box.
  2. Align the hole of the stand with the base, insert it fully, and fasten it securely.

Inserting the Home Desk 27 Infinity stand into the base

Attach the monitor

  1. Take the monitor out of the box. Remove the foam cover on its back and its protective bag.
  2. Lay the monitor face down in the front foam cover, back side up.
  3. Align the assembled stand with the stand connection on the back of the monitor, and push it in.
  4. Rock the stand gently back and forth twice to check that it’s firmly fixed.
  5. Hold the stand and lift the monitor upright. You can leave it in the lower foam cover while you do this.

Pushing the assembled stand into the stand connection on the back of the Home Desk 27 Infinity, with the monitor lying face down

Don’t hold or press the screen while you lift the monitor: it could break. To take the stand off later, press the quick release button down and pull the stand out.

Connect it

The ports are on the back, along the bottom edge: 2× HDMI, 2× DisplayPort, a 3.5 mm audio jack, and the DC power input.

Ports on the back bottom edge of the Home Desk 27 Infinity: two HDMI, two DisplayPort, 3.5 mm audio jack, and DC power input

Option 1: DisplayPort (best for 75 Hz)

  1. Plug a DisplayPort cable (not included) into your computer’s graphics card.
  2. Plug the other end into one of the monitor’s DisplayPort ports.

Up to 75 Hz at 4K with a DisplayPort 1.2 cable.

Option 2: HDMI (cable included)

  1. Plug the HDMI cable into your computer’s graphics card.
  2. Plug the other end into one of the monitor’s HDMI ports.

Up to 60 Hz at 4K with an HDMI 2.0 Premium High Speed cable.

Option 3: laptop with USB-C only

If your laptop only has a USB-C port that carries video, connect it with a USB-C to HDMI or USB-C to DisplayPort cable (not included).

Then plug in the power

  1. Connect the power adapter to its power cable.
  2. Plug the adapter into the monitor’s DC power input.
  3. Plug the power cable into a properly grounded wall outlet.

Buttons and on-screen menu

The buttons are under the front frame, along the bottom edge.

Home Desk 27 Infinity buttons under the front frame: Menu, Up, Down, Auto, and Power

  • Power: turns the monitor and its power light on or off.
  • M (Menu): opens the menu; press it again to leave the current menu.
  • Up / Down: move through the menu.
  • A (Auto): adjusts the display automatically.

The menu covers brightness, color, low blue light, eco mode, input source, sharpness, volume, and language.

Set up your display

  • Windows: open Settings › System › Display, choose Extend or Duplicate in Multiple displays, and set the resolution to 3840 × 2160.
  • macOS: open System Settings › Displays, choose Extended display or mirror, and click Arrange… to place it.

Safety and care

  • The screen has a polarizer layer, not a protective film. Don’t peel it off: that would damage the monitor and void the warranty.
  • Place it on a flat surface, away from water and heat, and don’t block the vents on the back.
  • Unplug it if you won’t use it for a long time. Don’t open it or try to repair it yourself.
  • Wall or arm mount: VESA 100 × 100 mm (3.94 × 3.94 in), with M4 screws.

Still not working?

See the Home Desk 27" Infinity troubleshooting article, or reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screen and of the cables plugged into the back;
  • your computer model and operating system version;
  • which cable you’re using (HDMI, DisplayPort, or USB-C adapter cable) and your monitor’s version (Black or color).

Also searched as: how to set up, assemble stand, attach stand, remove stand, quick release, base, HDMI, DisplayPort, DP, USB-C to HDMI, 75Hz, 60Hz, 4K, power adapter, 12V, OSD menu, auto button, VESA mount, wall mount, monitor arm, protective film, Home Desk 27, 27 inch 4K monitor, desktop monitor