Dual Flow Pro Max 15.6" troubleshooting: no signal, one screen dark, flicker, RGB light

Short answer: Most problems come from the DisplayLink driver (missing, or without the Mac screen recording permission), from a screen turned off on its own, or from missing power. Find what you see below and follow the steps.

The monitor shows “No signal”

  1. Install the DisplayLink driver for Windows, macOS, or Ubuntu. On a Chromebook it’s built in. On a work computer, your IT team may need to approve it.
  2. On a Mac, open System Settings › Privacy & Security › Screen & System Audio Recording and turn on DisplayLink Manager.
  3. Laptop with USB-A only? Use the cable’s USB-A adapter head, and plug the 30 W adapter into the monitor.
  4. Try another cable. A replacement must be a full-featured USB-C to USB-C cable (USB 3.1 with video).

Only one screen works

  1. Press and hold MENU for 5 seconds: a screen may have been turned off on its own.
  2. Unplug the cable and connect the monitor again.
  3. Check your display settings: if a screen isn’t extended, open Display settings (Windows) or System Settings › Displays (Mac), and set both screens to Extend / Extended display.
  4. Make sure the DisplayLink driver is installed and, on a Mac, allowed in Screen & System Audio Recording.

With the driver, both screens work on every Apple silicon Mac, base M1, M2, and M3 included.

The screens flicker or disappear for a moment

Your laptop battery is low. Plug the included 30 W adapter into the monitor.

A screen is stuck on solid red, green, or blue

The screen went into its factory test mode, usually because it didn’t get enough power the first time you plugged it in. Plug the power adapter that came in the box into the monitor and into a wall outlet, then follow the steps in My screen flickers, won't turn on, or is stuck on solid red, green, or blue.

The screens go black

When your laptop goes to sleep, the monitor sleeps too. Wake up your laptop, then press the monitor’s power button.

The on-screen menu doesn’t work, or it’s in the wrong language

  1. Reset the settings: press MENU, press + to choose Reset, then press MENU.
  2. If DCR mode is on, turn it off.
  3. If the Scene (ECO) mode was changed, set it back to Standard.

The RGB light doesn’t turn on

The RGB light only works with external power. Plug the 30 W adapter (or any USB-C PD charger of at least 30 W) into the monitor, then press the button on top to change the color.

Dual Flow Pro Max 15.6" RGB light button on top of the monitor

The stand seems unstable

Open the kickstand fully, and slide both screens all the way out.

Still not working?

Don’t try to repair the screens yourself. Reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screens and of the cables plugged in;
  • your laptop model and operating system version;
  • a screenshot of your display settings, and on a Mac, of your Screen & System Audio Recording settings.

Also searched as: no signal, not working, one screen black, second screen not working, only one screen works, screen turned off, flickering, screens go black, sleep, wake up, DisplayLink not working, DisplayLink Manager, screen recording permission, OSD not working, wrong language, reset, RGB not working, lights off, change color, wobbly stand, Dual Flow, Dual Flow Pro Max, red screen, green screen, blue screen, factory mode, test mode