Dual Boost Pro Max 15.6" Slim troubleshooting: screens not working, flicker, or “No signal”

Short answer: Most problems with the Dual Boost Pro Max 15.6" Slim come from the driver, the port you’re using, or power. Find what you see below and follow the steps in order.

Before you start

  1. Make sure the free Silicon Motion driver is installed. No screen works without it. See “How do I set up my Dual Boost Pro Max 15.6" Slim?” in this model’s help articles, or download it from siliconmotion.com/downloads.
  2. Use the cables that came in the box, plugged into the monitor’s full-function USB-C port, not the power-only port.

Dual Boost Pro Max 15.6" Slim ports: (1) full-function USB-C port for video and power, (2) USB-C power-only port, (3) indicator light

None of the screens show an image

  1. Install the Silicon Motion driver (see above), then unplug the monitor and plug it back in.
  2. On a Mac: open System Settings › Privacy & Security › Screen Recording (Screen & System Audio Recording on recent macOS versions) and turn on macOS InstantView. Then open InstantView and click CONNECT: the driver’s icon should appear in the menu bar.
  3. Check that your laptop’s USB-C port is full-function (supports video). If it isn’t, or you only have USB-A ports, use the USB-A adapter head and give the monitor its own power through its power port.
  4. Connect a 5V/3A (15 W) USB-C power adapter (not included) to the monitor’s power port. Your laptop may not supply enough power, especially on battery.
  5. Press and hold the Power button for 3 seconds to make sure the monitor is on. The indicator light turns green when the monitor is on and connected, and red when it’s off or gets no signal.

Only one screen works

  1. Check that no screen was turned off. Press and hold the MENU button for 5 seconds: this turns a single screen off or back on. Then unplug the cable and reconnect the monitor.
  2. On Windows: open Display settings and check that 3 displays are detected (your laptop plus 2 monitor screens). If one is set to Disconnect this display, change it to Extend desktop to this display.
  3. On a Mac: click the driver’s icon in the menu bar to check that the driver is connected, and make sure Screen Recording is on for macOS InstantView. Then reconnect the monitor.
  4. Connect a 5V/3A (15 W) USB-C power adapter (not included) to the monitor’s power port. Your laptop may not supply enough power, especially on battery.
  5. If one screen doesn’t light up at all while the other screen does, contact us (see below).

A screen flickers or goes dark for a moment

This usually means the monitor isn’t getting enough power, for example when your laptop battery is low.

  1. Connect a 5V/3A (15 W) USB-C power adapter (not included) to the monitor’s power port. Your laptop may not supply enough power, especially on battery.
  2. If you’re using the USB-A adapter head, the monitor always needs power through its power port.
  3. Plug your laptop into its charger.

A screen is stuck on solid red, green, or blue

The screen went into its factory test mode, usually because it didn’t get enough power the first time you plugged it in. Connect a 5V/3A (15 W) USB-C power adapter (not included) to the monitor’s power port, then follow the steps in My screen flickers, won't turn on, or is stuck on solid red, green, or blue.

The monitor shows “No signal”

  1. Make sure your laptop has a full-function USB-C port that supports video. Otherwise, use the USB-A adapter head plus power.
  2. Connect a 5V/3A (15 W) USB-C power adapter (not included) to the monitor’s power port. Your laptop may not supply enough power, especially on battery.
  3. Try another cable to rule out a damaged one. It must be a USB-C cable, USB 3.0 or faster (data).
  4. Still “No signal”? Contact us (see below).

The screens go black when my laptop sleeps

That’s normal: the monitor sleeps with your laptop.

  1. Wake your laptop.
  2. Press the monitor’s Power button to wake it.

I can’t install the driver on my work computer

The Dual Boost Pro Max 15.6" Slim needs the Silicon Motion driver, and no screen works without it.

  • Ask your IT team to approve or install it. It’s the same industry-standard, secure technology used in docking stations from major brands.
  • After they install it, restart the laptop and plug the monitor back in.

The screen menu is in the wrong language

  1. Press MENU.
  2. Press + to choose Reset, then press MENU. All settings go back to their defaults.

The stand feels unstable

Fully open the kickstand and both screens.

Still not working?

Reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screens, and of the monitor’s ports showing which cables are plugged in where;
  • your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 13, Windows 11);
  • which cables you’re using, which laptop ports they go into, and the driver version you installed.

Also searched as: not working, no signal, black screen, only one screen works, one monitor not working, second screen not working, screens not detected, flickering, flicker, screen goes dark, blinking, power saving, not enough power, driver not working, SMI USB Display, Silicon Motion, InstantView not connecting, screen recording permission, IT blocked driver, work laptop, wrong language, reset menu, wobbly stand, Dual Boost Slim, Dual Boost Pro Max Slim, Dual Boost 15.6 Slim, slim dual monitor, dual 15.6 inch monitor, red screen, green screen, blue screen, factory mode, test mode