Dual Snap 16" Ultra troubleshooting: only one screen works, flicker, no signal

Short answer: Most problems come from the laptop’s ports (each screen needs its own video port), from missing power on a screen, or from a base M1, M2, or M3 MacBook, which drives only one external display. Find what you see below and follow the steps.

Only one screen works

  1. MacBook with a base M1, M2, or M3 chip (not Pro or Max)? These Macs drive only one external display, so only one screen can work. To run both, add the H5T adapter (sold separately) and install its free Silicon Motion app for macOS. M1, M2, and M3 Pro or Max chips, and every M4 or M5 chip, run both screens without it.
  2. Give each screen its own cable and its own laptop port. Each screen is an independent display: one cable runs one screen.
  3. Use video ports only. USB-A ports don’t carry video, and some USB-C ports don’t either. If a USB-C port gives no picture, try your laptop’s other USB-C port, or connect that screen with the Mini HDMI to HDMI cable (option 2 in the setup article).
  4. Screen connected by HDMI? The Mini HDMI port doesn’t supply power. Plug the USB-C to USB-A cable into that screen and into a 5V/2A (or higher) USB power adapter (not included).
  5. Check the input. On the dark screen, press M, go to Source, and choose the port you’re using: Type-C1, Type-C2, or HDMI.

A screen flickers, dims, or turns off

Each screen needs at least 5V/2A. Some laptop USB-C ports can’t supply it, especially when the brightness is above 50.

  1. Plug the USB-C to USB-A cable into the screen’s second USB-C port.
  2. Plug the USB-A end into a 5V/2A (or higher) USB power adapter (not included).
  3. Or lower the brightness with the – button.

A screen is stuck on solid red, green, or blue

The screen went into its factory test mode, usually because it didn’t get enough power the first time you plugged it in. Plug the USB-C to USB-A cable into the screen’s second USB-C port and into a USB power adapter of at least 15 W (not included), then follow the steps in My screen flickers, won't turn on, or is stuck on solid red, green, or blue.

A screen shows “No signal”

  1. Unplug the cable at both ends and plug it back in firmly.
  2. Check that the laptop port carries video (see “Only one screen works” above).
  3. On that screen, press M › Source and choose the right input.
  4. On HDMI, make sure the screen also has power.

Both screens show the same picture

  • Windows: open Settings › System › Display, select each screen, and choose Extend these displays in Multiple displays.
  • macOS: open System Settings › Displays, click each Dual Snap screen, and choose Extended display instead of Mirror.

A screen is upside down or in the wrong place

  • Upside down on Windows: select the screen in Settings › System › Display, open Orientation, and choose Landscape (flipped).
  • Upside down or in portrait on a Mac: select the screen in System Settings › Displays and change Rotation.
  • Mouse goes off the wrong edge: click Identify (Windows) or Arrange… (Mac) and drag the screens to match where they really are.

A screen won’t stay on the backplate

  1. Fully extend the left and right brackets of the backplate.
  2. Align the slot on the back of the screen with the bracket’s clasp, and push until the screen is secured.
  3. Never force a screen past 225°.

The picture or menu looks wrong

Press M, go to Reset, and confirm to go back to the factory settings. Each screen has its own menu.

Still not working?

Reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screens and of the cables plugged into each screen;
  • your laptop model, its chip (for Macs), and operating system version;
  • which cables you’re using and which laptop ports they go into;
  • a screenshot of your display settings.

Also searched as: only one screen works, second screen not working, one monitor black, MacBook Air M1 only one screen, M2, M3, H5T adapter, no signal, flickering, screen turns off, dim, not enough power, HDMI no power, both screens same image, mirror, extend, upside down, portrait, screen falls off, clasp, backplate, source, OSD reset, Dual Snap 16, red screen, green screen, blue screen, factory mode, test mode