Single Boost Pro Max 15.6" (Full HD) troubleshooting: no signal, no power, dim screen, flicker, and more

Short answer: The monitor has no battery and the Mini HDMI port carries no power, so most problems come from power or from the cable. Find what you see below and follow the steps.

Before you start

  1. Check what powers the monitor. With one USB-C cable, your laptop or phone powers it. With HDMI, you must also plug the USB-A to USB-C power cable into a USB power adapter of 10 W (5V/2A) or more.
  2. Use the cables that came in the box. Not every USB-C cable carries video: many only charge.

Single Boost Pro Max 15.6" ports: two full-function USB-C ports (power, video, and audio) and a mini HDMI port (video and audio only)

The power light is off

  1. Press and hold the Power/Back button for 3 seconds to turn the monitor on.
  2. Check that the USB cable is firmly plugged into the monitor and into its power source.
  3. With HDMI, connect the power cable first, then the HDMI cable.

“No signal” or the monitor can’t connect

  1. Check that the monitor and your computer are both on.
  2. Check that the cable is fully plugged in at both ends, and that none of its pins are bent.
  3. Using one USB-C cable? Your laptop’s USB-C port must be full-function (video output). If it isn’t, connect with HDMI plus USB power instead.
  4. Using HDMI? Make sure the monitor also gets power from a USB power adapter of 10 W (5V/2A) or more. HDMI doesn’t power it.
  5. Still nothing? Connect the monitor to another device to check whether the problem follows the monitor or the device.

Not sure what your USB-C port supports? Check your laptop’s specifications for video output on USB-C, or for Thunderbolt.

The screen is dim

  • Connected to a phone without external power? The monitor switches to energy-saving mode (30% brightness). Plug a 10 W (5V/2A) or stronger USB power adapter into the monitor’s other USB-C port.
  • Brightness or volume above 80%, or a low laptop battery? Add external power the same way.
  • Otherwise: press the trackwheel, open Brightness, and adjust it.

Brightness or volume is greyed out in the menu

  1. Press the trackwheel to open the menu.
  2. Turn HDR mode off.
  3. Set the ECO (scene) mode to Standard.

The screen flickers in different colors at start-up

  1. Press and hold Power/Back for 3 seconds to turn the monitor off.
  2. Turn it back on.

The screen is stuck on solid red, green, or blue

The screen went into its factory test mode, usually because it didn’t get enough power the first time you plugged it in. Plug a 10 W (5V/2A) or stronger USB power adapter (not included) into the monitor’s other USB-C port, then follow the steps in My screen flickers, won't turn on, or is stuck on solid red, green, or blue.

The image bounces or shows a wave pattern

  1. Check that the USB cable is firmly connected between the monitor and the computer.
  2. Move away electrical devices that could cause interference.

The colors look wrong

  1. Unplug the cable and check that none of its pins are bent.
  2. Plug it back in firmly.
  3. To undo any menu changes, press the trackwheel and choose Reset to restore factory settings.

No sound

  1. Press the trackwheel, open Misc., and check that Mute is off and Volume is up.
  2. On your laptop, select the monitor as the sound output device.

Still not working?

Please contact us before anything else at aura-displays.com/pages/support and include:

  • a photo or short video of the screen, and of the cables plugged into the monitor;
  • your laptop or phone model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 13, Windows 11);
  • which cables you’re using, which ports they go into, and what powers the monitor.

Also searched as: no signal, black screen, won’t turn on, no power, power light off, LED off, USB-C not working, HDMI not working, HDMI no power, dim screen, 30% brightness, energy saving mode, brightness greyed out, volume greyed out, can’t change brightness, HDR mode, ECO mode, flickering, flicker colors, wave pattern, bouncing image, interference, wrong colors, color defects, bent pins, no sound, mute, Single Boost 15.6, Single Boost Pro Max, portable monitor not working, red screen, green screen, blue screen, factory mode, test mode