Short answer: Most Dual Air Max 15.3" problems come from the cables or from power. Each screen needs its own cable, and a screen that stays dark, dim, or restarts usually needs a small USB-C power adapter. Find what you see below and follow the steps.
Only one screen works
The Dual Air Max 15.3" doesn't run both screens from a single cable: each screen needs its own connection. Go through these checks in order.

- Plug in a second cable. Connect one USB-C to USB-C cable to USB-C port 1 and the other to USB-C port 2 on the monitor, each going to its own full-function USB-C port on your laptop.
- Try another port on your laptop. Some USB-C ports carry data but not video. If a screen stays off, move its cable to another USB-C port, or check your laptop's specifications for video output on USB-C (Thunderbolt 3 and 4 ports always work).
- Only one full-function USB-C port? Run the second screen over HDMI: plug the HDMI to USB-C cable from the box into the free USB-C port on the monitor and into your laptop's HDMI port. Then power the monitor through its PD port, with a 5V/2A (10 W) or higher USB-C power adapter (not included) or a laptop USB-C port that delivers power.
-
MacBook Air or MacBook Pro with a standard M1, M2, or M3 chip (not Pro or Max)? These Macs support only one external display, so only one screen works over USB-C. To use the second screen:
- connect it through the H5T adapter (USB to HDMI) that comes in the box, with the HDMI to USB-C cable;
- install the free Silicon Motion "USB Display" software for macOS;
- power the monitor through its PD port.
![]()
See How do I set up my Dual Air Max 15.3"? for every connection option.
A screen shows "No signal"
- Unplug the cable from both ends and plug it back in firmly, straight in line with the port.
- Use the cables from the box. Not every USB-C cable carries video.
- Check that your laptop's port supports video output. If it doesn't, use another port or switch to HDMI (see above).
- Using the H5T adapter? Make sure the Silicon Motion "USB Display" software is installed, then unplug the adapter and plug it back in.
A screen looks dim, stays dark, or restarts
- Brightness is set to 40% by default. Push the multi-function button left (minus) to adjust it.
- For more brightness, or if a screen stays dark or restarts, connect a 5V/2A (10 W) or higher USB-C power adapter to the monitor's PD port and plug it into a wall outlet. The power adapter isn't included.
- Phones and game consoles always need this power adapter.

A screen is stuck on solid red, green, or blue
The screen went into its factory test mode, usually because it didn't get enough power the first time you plugged it in. Connect a 5V/2A (10 W) or higher USB-C power adapter (not included) to the monitor's PD port, then follow the steps in My screen flickers, won't turn on, or is stuck on solid red, green, or blue.
Both screens show the same picture
Your computer is set to mirror. Switch it to extend:
- Windows 10 or 11: right-click the desktop, select Display settings, then under Multiple displays choose Extend these displays.
- macOS: open System Settings › Displays, select each Dual Air screen, and set it to Extended display.
The mouse jumps to the wrong screen
- Windows: in Display settings, drag the screens under Rearrange your displays to match where they sit on your desk.
- macOS: in System Settings › Displays, click Arrange… and drag the screens into place.
No sound from the monitor
- Windows: right-click the speaker icon on the taskbar, select Open Sound settings, and choose Dual Air as the output device.
- macOS: open System Settings › Sound › Output and choose Dual Air.
- Push the multi-function button right (plus) to turn the volume up.
Still not working?
Reach out to our support team at aura-displays.com/pages/support and include:
- a photo or short video of the screens, and of the back of the monitor showing which cables are plugged in where;
- your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 15, Windows 11);
- which cables you're using, which laptop ports they go into, and whether a power adapter is connected.
Helpful links
- All Dual Air Max 15.3" help articles
- Dual Air Max 15.3" user manual (PDF): see "Connection method"
- Dual Air Max 15.3" Quick Start (PDF)
- Dual Air Max 15.3" product page
- Silicon Motion "USB Display" driver (H5T adapter only): Windows · macOS · Ubuntu · Android
Also searched as: only one screen works, one screen not working, second screen not working, second screen black, one cable both screens, single cable, no signal, screen dark, screen black, screen dim, too dark, low brightness, brightness 40%, screen restarts, flickering, not enough power, power adapter, PD port, MacBook Air M1 only one screen, MacBook Air M2 one monitor, M3 second display, H5T not working, USB Display, same picture on both screens, mirrored, duplicate, extend, no sound, Dual Air Max, Dual Air Max 15.3, Dual Air 15.3, red screen, green screen, blue screen, factory mode, test mode