-
If your Stratus isn't new, make sure your Stratus is updated to the latest software version using the Stratus Update Tool.
-
Stratus' looper lives within the black Multiknob located below the LED strip, when Stratus is in Looper Mode.
-
To start looping, press the Multiknob once. Stratus will begin recording (LEDs will flash red).
-
To begin playback, press the Multiknob a second time (LEDs will flash green).
-
To begin overdubbing (simultaneous playback and recording), press the Multiknob a third time (LEDs will flash yellow). Subsequent Multiknob presses will alternate between playback and overdubbing.
-
To clear your loop, press and hold the Multiknob for 3 seconds (LEDs will rapidly flash red 3 times). If you are having trouble with the looper, pressing and holding the Multiknob for 3 seconds will CLEAR your loop, stop looping, and start the looper over from scratch.
-
To pause your loop, double-tap the Multiknob. You can resume playback by tapping the Multiknob once.
The Looper is accessed through Stratus' hardware. There is no Looper functionality in the mobile app itself.
The Looper features up to 5 minutes of recording time and unlimited overdubs.
If you have any issues or feedback for the Looper, please reach out to support@chaosaudio.com