Which port on my Triple Boost Pro Max 15.6" is for power and which is for video? Which cable goes where?

Short answer: Port 1 (full-function USB-C) is for the video cable to your laptop. Port 2 (USB-C power supply port) is only for power: plug the included 30 W adapter into it when your laptop can't supply 30 W. Install the Silicon Motion driver first: no screen works without it.

The ports

  • 1 · Type-C full-function port: carries the audio and video signal, and power.
  • 2 · Type-C power supply port: power only. It doesn't carry video.
  • 3 · Indicator light: green = powered on and connected; red = powered off or no signal.

Triple Boost Pro Max 15.6" ports from the user manual: 1 Type-C full-function port, 2 Type-C power supply port (power only), 3 indicator light

The cables in the box

  • USB-C to USB-C cable with a USB-A adapter head, 3.3 ft (1 m): video, from your laptop to port 1.
  • USB-A to USB-C cable: power.
  • 30 W USB-C PD power adapter and a USB disk with the display driver.

Which cable goes where?

After the driver is installed, the monitor needs at least 30 W of sustained power to receive a signal. Use option 1 whenever your laptop allows it: one cable to your laptop, one cable to the power adapter.

  1. Install the Silicon Motion driver (from the USB disk, or from siliconmotion.com/downloads).
  2. Connect the video cable (adapter head removed) from your laptop's full-function USB-C port to port 1.
  3. Connect the 30 W adapter to port 2, and plug it into a wall outlet.

Option 2: one USB-C cable alone

Only if your laptop's USB-C port supplies 30 W or more. If the screens stay dark or show no signal, add the power adapter (option 1).

Option 3: your laptop has only USB-A ports

  1. Install the driver.
  2. Fit the USB-A adapter head onto the video cable. Plug the USB-C end into port 1 and the USB-A end into your laptop.
  3. Connect the 30 W adapter to port 2.

This monitor has no HDMI port.

Triple Boost Pro Max 15.6" ways to add external power from the user manual: laptop, USB-A converter head, phone, desktop computer

MacBook with a base M1, M2, or M3 chip?

With the Silicon Motion driver installed, all screens work, even on base M1, M2, and M3 Macs. See How do I check that my monitor's driver is installed and running?

Still not working?

Red light or no signal: check the driver and the 30 W adapter on port 2 first. Then contact us at aura-displays.com/pages/support with a photo of the cables plugged into the monitor. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).

Also searched as: which port, which cable, power port, power only port, full-function port, USB-A head, red light, no signal, 30W adapter, Silicon Motion, InstantView, Triple Boost