Which port on my Dual Boost Pro Max 15.6" Ultra is for power and which is for video? Which cable goes where?

Short answer: Port 1 (full-function USB-C) is for the video cable to your laptop. Port 2 (USB-C power supply port) is only for power: plug the included 30 W adapter into it. Install the Silicon Motion driver first: no screen works without it.

The ports

  • 1 · Type-C full-function port: carries the audio and video signal, and power.
  • 2 · Type-C power supply port: power only. It doesn't carry video.
  • 3 · Indicator light: green = powered on and connected; red = powered off or no signal.

Dual Boost Pro Max 15.6" Ultra ports from the user manual: 1 Type-C full-function port, 2 Type-C power supply port (power only), 3 indicator light

The cables in the box

  • USB-C to USB-C cable with a USB-A adapter head, 3.3 ft (1 m): video, from your laptop to port 1.
  • USB-C to USB-C cable for the power adapter, 3.3 ft (1 m): from the adapter to port 2.
  • 30 W USB-C PD power adapter and a USB disk with the display driver.

Which cable goes where?

Always use two cables: one cable to your laptop, one cable to the power adapter. The monitor needs at least 30 W of sustained power to receive a signal.

  1. Install the Silicon Motion driver (from the USB disk, or from siliconmotion.com/downloads).
  2. Connect the video cable (adapter head removed) from your laptop's USB-C port to port 1 of the monitor.
  3. Connect the 30 W adapter to port 2 with the power cable, and plug it into a wall outlet.

Option 2: your laptop has only USB-A ports

  1. Install the driver.
  2. Fit the USB-A adapter head onto the video cable. Plug the USB-C end into port 1 and the USB-A end into your laptop.
  3. Connect the 30 W adapter to port 2.

Phones and desktop computers connect the same way, always with the power adapter on port 2. This monitor has no HDMI port.

Dual Boost Pro Max 15.6" Ultra ways to add external power from the user manual: laptop, USB-A converter head, phone, desktop computer

MacBook with a base M1, M2, or M3 chip?

With the Silicon Motion driver installed, both screens work, even on base M1, M2, and M3 Macs. See How do I check that my monitor's driver is installed and running?

Still not working?

Red light or no signal: check the driver and the 30 W adapter on port 2 first. Then contact us at aura-displays.com/pages/support with a photo of the cables plugged into the monitor. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).

Also searched as: which port, which cable, power port, power only port, full-function port, USB-A head, red light, no signal, 30W adapter, Silicon Motion, InstantView, Dual Boost Ultra