Which port on my Dual Air 14" is for power and which is for video? Which cable goes where?

Short answer: USB-C port 1 and USB-C port 2 are full-function (video and power): connect one cable per screen there. The USB-C PD power port is for power only, from a 5V/2A USB power adapter (not included).

The ports (back of the monitor)

  • USB-C port 1: full-function USB-C, video and power.
  • USB-C port 2: full-function USB-C, video and power.
  • USB-C PD power port: power input only. No video.

Back of the Dual Air 14 with the speaker, kickstand, multi-function button, USB-C port 1, USB-C port 2, and USB-C PD power port labeled

The cables in the box

  • 2 × USB-C to USB-C cable: full-featured, for video (and power).
  • 1 × USB-A to USB-C cable: power only. Use it between a USB power adapter and the PD power port, never for video.
  • 1 × HDMI to USB-C cable: video from an HDMI port into the monitor.
  • 1 × H5T adapter (USB to HDMI): for a second screen on a base M1, M2, or M3 Mac (see below).
  • No power adapter is included.

Which cable goes where?

Only full-function USB-C ports (with video output) and HDMI ports on your laptop work with this monitor. Use option 1 whenever your laptop allows it.

  1. Connect USB-C port 1 to your laptop with a USB-C to USB-C cable.
  2. Connect USB-C port 2 to your laptop with the second USB-C to USB-C cable.
  3. If a screen doesn't light up or restarts, connect a 5V/2A USB power adapter (not included) to the PD power port.

Dual Air 14 connected to a laptop with two USB-C to USB-C cables, one per screen

Option 2: one full-function USB-C port and one HDMI port

  1. Connect one screen with a USB-C to USB-C cable.
  2. Connect the other screen with the HDMI to USB-C cable (HDMI end in your laptop).
  3. With HDMI, external power is always required: connect a 5V/2A USB power adapter (not included) to the PD power port with the USB-A to USB-C cable.

Dual Air 14 connected with one USB-C to USB-C cable and one HDMI to USB-C cable, with a power adapter plugged into the monitor

MacBook with a base M1, M2, or M3 chip?

  • These Macs drive only one external display, so only one screen works over USB-C.
  • Fix: the second screen runs through the included H5T adapter, which needs free software (driver) from aura-displays.com/pages/support. Connect it with the HDMI to USB-C cable, and add external power.
  • MacBooks with M1–M3 Pro or Max, or any M4 or M5 chip, run both screens over USB-C. See How many screens will my Mac show?

Still not working?

Contact us at aura-displays.com/pages/support with a photo of your laptop's ports and of the cables plugged into the monitor, plus your laptop model. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).

Also searched as: which port, PD port, power port, video port, which cable, USB-A cable, HDMI to USB-C, H5T adapter, MacBook Air one screen, M1 M2 M3, no signal, Dual Air