Short answer: Most problems come down to how the Triple Aero ’98 Pro Max 16" is connected, its power, or the free DisplayLink driver it needs. Find what you see below and follow the steps.
Before you start
- Plug the monitor into its power adapter: the USB-C power cable goes into the PD port, and the adapter goes into a wall outlet. The monitor needs outside power however you connect it. Use the 65 W adapter that came in the box, or another USB-C PD charger of at least 65 W.
- Use the cables that came in the box. Not every USB-C cable carries video.
- Unplug the cables and plug them back in, making sure both ends are fully connected.
How it should be connected
Seen from the back, the ports are, from left to right: three HDMI ports, PD (power), then TYPE-C.
Use option 1 whenever your laptop allows it: one cable to your laptop, one cable to the power adapter.
- Option 1 (recommended): one USB-C cable from the monitor’s TYPE-C port to a laptop USB-C port that supports video, plus the power cable in PD.
- Option 2: one USB-A cable + one HDMI cable. The USB-A to USB-C cable goes from the TYPE-C port to a USB-A port on your laptop, and the HDMI cable goes into the HDMI port right next to PD. Plus the power cable in PD.
- Option 3: three HDMI cables, one per HDMI port, plus the power cable in PD. The box includes one mini HDMI to HDMI cable, so you’ll need two more.



Only the left screen works
The left screen is the one that works without a driver. The middle and right screens need the driver.
- Install the DisplayLink driver. Download it for Windows 10 or 11, macOS, or Ubuntu 24.04. Run the installer, follow the prompts, then plug the monitor back in. On a Chromebook, there’s nothing to install. On a work computer, your IT team may need to approve the install.
-
On a Mac, allow screen recording. Open System Settings › Privacy & Security › Screen & System Audio Recording and turn on DisplayLink Manager. Without this permission, macOS keeps the extra screens dark. If DisplayLink Manager isn’t in the list, click + and add it from your Applications folder.

- Using only one HDMI cable? One HDMI cable runs one screen. Switch to option 1 if your laptop’s USB-C port supports video, otherwise to option 2.
Good to know for Mac users: with the driver installed, all three screens work on every Apple silicon Mac, including base M1, M2, and M3 models, which normally support only one external display.
Only the middle and right screens work
Your laptop’s USB-C port sends data but not video, so the left screen gets no signal.
- Keep the USB cable plugged in.
- Add one HDMI cable from your laptop to the HDMI port right next to PD.

Only the middle screen, or only the right screen, works
An HDMI cable in one of the other HDMI ports lights up that screen only. Fix it one of these ways:
- Switch to option 1 (one USB-C cable), or
- Use option 3: three HDMI cables, one per screen.
None of the screens turn on, or the monitor isn’t detected
- Check that the power adapter is plugged into the monitor’s PD port and into a working outlet.
- Press and hold the Menu/Power button for 2 to 3 seconds to turn the monitor on.
- Unplug the cables and plug them back in, making sure they’re securely connected at both ends.
- Make sure the DisplayLink driver is installed (see “Only the left screen works” above).
- Unplug your laptop’s own charger, then connect the monitor again.
- On a Mac: check that DisplayLink Manager is allowed in Screen & System Audio Recording (see “Only the left screen works” above).
All three screens show the same image
Your computer is mirroring (duplicating) the screens instead of extending them. Mirror or Duplicate shows the same image on every screen; Extend gives each screen its own content.
- Windows: open Settings › System › Display and choose Extend these displays.
- Mac: switch the display mode to extend in DisplayLink Manager, or open System Settings › Displays, select each Aura screen, and set Use as to Extended display.
A screen flickers
- Unplug the cables and plug them back in firmly.
- Try another cable of the same type, for example another full-featured USB-C video cable.
- Try another port on your laptop.
- Check the cable connectors and the ports for dust, bent pins, or oxidation.
Colors look different between screens
- Use the monitor’s buttons to open the on-screen (OSD) menu on each screen, and make sure the display mode and settings are the same on all three.
- On a Mac: open System Settings › Displays and turn off True Tone if it’s on.
- On a Mac: each screen has its own settings. Check that the color profile and brightness match on every screen.
The monitor keeps restarting
- Check the power adapter. Use the 65 W adapter that came in the box, or another adapter with enough power.
- Check the power cable. Use the USB-C power cable that came in the box, or another cable that can handle the same power.
- Use a stronger adapter. The monitor shares its power with your laptop over the USB-C video cable. If that leaves too little for the monitor, switch to a higher-wattage USB-C PD adapter.
The screens are in the wrong order
If all three screens work but your mouse doesn’t move across them in the right order:
- Windows: open Settings › System › Display, click Identify to see each screen’s number, drag the displays to match where they actually sit, then click Apply.
- Mac: open System Settings › Displays, click Arrange, drag the displays to match where they actually sit, then click Done.
More details: How do I arrange, extend, mirror, or rotate my screens on Windows and Mac?
A side screen doesn’t line up with the middle screen
If a side screen sits higher, lower, or at an angle compared with the middle screen:
- Fully close that side screen.
- Gently adjust it by hand so its top edge lines up with the top edge of the middle screen.
- Open it again and check the alignment.
Go slowly and gently. Don’t force the hinges or turn them further than they’re meant to go. If a hinge is loose, damaged, or broken, contact our support team (see “Still not working?” below).
The stand or a hinge looks damaged
If the stand, the support rod, or a hinge looks damaged or bent:
- Don’t force the stand or the hinge.
- Place the monitor on a stable, flat surface.
- Don’t take the monitor apart or try to repair it yourself.
Contact our support team (see “Still not working?” below) and include a photo.
Which cable does what
- Black USB-C to USB-C cable (video): the full-featured cable from the box. Use it between your laptop and the monitor’s TYPE-C port. A charging-only USB-C cable may not carry video.
- White USB-C to USB-C cable (power only): connects the power adapter to the monitor’s PD port. Don’t use it for video.
Can the monitor charge my laptop?
Yes, up to 35 W. Connect the monitor to your laptop’s full-featured USB-C port with the USB-C video cable (option 1), and plug the included adapter, or a higher-wattage one, into the monitor’s PD port.
Still not working?
Reach out to our support team at aura-displays.com/pages/support and include:
- your computer model (for example, MacBook Air M2 or Dell XPS 13);
- your Windows or macOS version (for example, Windows 11 or macOS Sequoia);
- your Aura model: Triple Aero ’98 Pro Max 16";
- how you connected it (for example, one USB-C cable, or one USB-A cable plus one HDMI cable);
- which cables you’re using and which laptop ports they go into;
- which driver you installed, and its version;
- a photo or short video of the problem, and of the back of the monitor showing which cables are plugged in where.
Our team answers Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time.
Helpful links
- All Triple Aero ’98 Pro Max 16" help articles
- How do I set up my Triple Aero ’98 Pro Max 16"?
- Triple Aero ’98 Pro Max 16" user manual (PDF): see “Troubleshooting”
- Triple Aero ’98 Pro Max 16" product page
- DisplayLink driver: Windows · macOS · Ubuntu · ChromeOS: built in, nothing to install
Also searched as: only one screen works, one monitor not working, 2 screens not working, second and third screen black, middle screen not working, right screen not working, left screen only, extra screens not detected, no signal, triple screen not working, DisplayLink not working, DisplayLink Manager, screen recording permission, which HDMI port, colors different, True Tone, monitor keeps restarting, charge my laptop, pass-through charging, Triple Aero 98, Triple Aero '98, Bondi Blue, special edition, Triple Aero 16, same image on all screens, mirror, duplicate, extend, flickering, screens in wrong order, Identify, Arrange, side screen not aligned, hinge out of sync, hinge loose, stand damaged, white cable, black cable, power-only cable