Short answer: Unfold the stand and screens, plug the monitor into its 65 W power adapter, connect it to your laptop with one USB-C cable if your laptop allows it, then install the free DisplayLink driver so all three screens light up.
Before you start
- It always needs power. Plug the included 65 W adapter into the monitor’s PD port, however you connect it. Any USB-C PD wall charger or power bank that delivers at least 65 W works too.
- It needs a free driver. For USB-C and USB-A connections, install the DisplayLink driver before you connect the monitor for the first time (see “Install the DisplayLink driver” below). On a work computer, your IT team may need to approve it.
Unfold the monitor
- Put the Triple Aero ’98 on your desk, facing the right way (screens toward you).
- Unfold the stand and lock it in place.
- Rotate the folded screens about 135° so they stand up straight.
- Unfold the left and right screens and adjust them to the viewing angle you like.
Watch your fingers: the stand closes with a strong spring force. Hold the safe grip area with one hand while you move the stand with the other, keep your fingers away from moving parts, and fold it slowly and steadily. To pack it up, follow the steps above in reverse order (4 to 1).
Connect it to your laptop
Seen from the back, the ports are, from left to right: three HDMI ports, PD (power), then TYPE-C. Pick one of these setups.
Use option 1 whenever your laptop allows it: one cable to your laptop, one cable to the power adapter.
Option 1 (recommended): one USB-C cable
For laptops with a USB-C port that supports video (check your laptop’s specifications for video output on USB-C). One cable runs all three screens.
- Plug the 6.6 ft (2 m) USB-C power cable into the monitor’s PD port and the 65 W adapter into a wall outlet.
- Plug the 3.3 ft (1 m) USB-C to USB-C video cable into the monitor’s TYPE-C port.
- Plug the other end into your laptop’s USB-C port.

Option 2: one USB-A cable + one HDMI cable
If your laptop’s USB-C port doesn’t support video, or your laptop only has USB-A ports.
- Plug the USB-C power cable into the monitor’s PD port and the adapter into a wall outlet.
- Plug the USB-A to USB-C cable into the monitor’s TYPE-C port and into a USB-A port on your laptop.
- Plug the mini HDMI to HDMI cable into the HDMI port right next to PD, and into your laptop’s HDMI port.

Option 3: three HDMI cables
Only if your laptop has three HDMI outputs. No driver needed: each HDMI cable runs one screen.
- Plug the USB-C power cable into the monitor’s PD port and the adapter into a wall outlet.
- Plug one HDMI cable into each of the monitor’s three HDMI ports, and the other ends into your laptop. The box includes one mini HDMI to HDMI cable, so you’ll need two more.

Install the DisplayLink driver
The Triple Aero ’98 Pro Max 16" uses the free DisplayLink driver. Without it, only one screen works (over HDMI).
Windows 10 or 11
- Download the driver from the DisplayLink Windows page.
- Run the installer and follow the prompts.
- Connect the cables. All three screens turn on.
macOS
- Download the driver from the DisplayLink macOS page.
- Run the installer and follow the prompts.
- Open System Settings › Privacy & Security › Screen & System Audio Recording and turn on DisplayLink Manager. Without this permission, macOS keeps the extra screens dark.

With the driver installed, all three screens work on every Apple silicon Mac, including base M1, M2, and M3 models.
Ubuntu 24.04
- Download the driver from the DisplayLink Ubuntu page.
- Unzip the package.
- Allow the .run file to install, then follow the prompts until the installation is complete.
ChromeOS
Nothing to install: the DisplayLink driver is built into ChromeOS. Just plug it in.
Arrange your screens
Windows
- Open Settings › System › Display.
- Scroll down and choose Extend these displays (or Duplicate these displays). Windows can only duplicate to two displays at a time.
- Click Identify to see which number belongs to which screen.
- Drag the displays to match where the screens actually sit, then click Apply.
macOS
- Open System Settings › Displays.
- Drag the displays to match where the screens actually sit.
- Select each screen and, under Use as, choose Extended display.
Ubuntu
- Open Settings › Displays.
- Drag the displays to match where the screens actually sit.
- Select each screen to set its resolution, scaling, and more.
ChromeOS
- Open Settings › Device › Displays.
- Drag the displays to match where the screens actually sit.
- Select each screen to set its resolution, scaling, and more.
Use the on-screen menu
The buttons control each screen’s own settings (brightness, color, low blue light, language, source, and volume).
- Short-press Menu/Power to open the menu on one screen. Short-press it again to switch to the next screen.
- Press Up (+) or Down (–) to move between menus.
- Press Confirm/Exit to select.
- Press Up (+) or Down (–) to change the value.
- Long-press Confirm/Exit to leave the menu.
To turn the monitor on or off, press and hold Menu/Power for 2 to 3 seconds.
Still not working?
See our Triple Aero ’98 Pro Max 16" troubleshooting article. If that doesn’t help, reach out to us at aura-displays.com/pages/support and include:
- a photo of the back of the monitor showing which cables are plugged in where;
- your laptop model and operating system version;
- which cables you’re using and which laptop ports they go into.
Helpful links
- All Triple Aero ’98 Pro Max 16" help articles
- Triple Aero ’98 Pro Max 16" user manual (PDF)
- Triple Aero ’98 Pro Max 16" product page
- DisplayLink driver: Windows · macOS · Ubuntu · ChromeOS: built in, nothing to install
Also searched as: how to set up, how to connect, setup guide, installation, unfold, open the stand, fold, which cable, one cable setup, USB-C setup, HDMI setup, which HDMI port, DisplayLink install, driver download, extend displays, arrange displays, Windows display settings, Mac display settings, OSD menu, brightness, turn off monitor, Triple Aero 98, Triple Aero '98, Bondi Blue, blue triple monitor, special edition, Triple Aero 16, triple monitor laptop