Single Aero Pro Studio 18.5" Ultra (QHD 2.5K) troubleshooting: no signal, black screen, dim screen, and more

Short answer: First check the power: this model always needs its 45 W power adapter. Then check the cable and the laptop port. Find what you see below and follow the steps.

Before you start

  1. Plug the included power adapter into the monitor’s USB-C power port and into a wall outlet. The monitor needs it however you connect it: your laptop’s port alone isn’t enough. Another power source must deliver at least 45 W.
  2. Use the cables that came in the box. Not every USB-C cable carries video: many only charge.

“No signal” or a black screen with the USB-C cable

  1. Check that the video cable is in the monitor’s USB-C data port, and the power adapter is in the USB-C power port.
  2. Make sure you’re using the included full-featured USB-C to USB-C video cable. A charging-only cable lights nothing up.
  3. Plug it into a full-featured USB-C port or a Thunderbolt port on your laptop. If your laptop has several USB-C ports, try another one: some only charge or transfer data.
  4. Still black? Your laptop’s USB-C port probably doesn’t send video. Connect with HDMI instead (see the next section).

Not sure what your USB-C port supports? Check your laptop’s specifications for video output on USB-C, or for Thunderbolt.

“No signal” or a black screen with HDMI

  1. Check that the power adapter is plugged into the monitor’s USB-C power port and into a working outlet.
  2. Plug the mini HDMI end of the included cable firmly into the monitor’s Mini HDMI port, and the other end into your laptop’s HDMI port.
  3. The monitor detects the input on its own. If it doesn’t, short-press Power/Menu, open Source, and select HDMI.

The monitor doesn’t turn on, or the screen is dim

  1. Check the power adapter: it must be the included 45 W adapter, or a USB-C PD charger or power bank of 45 W or more.
  2. Press and hold Power/Menu to turn the monitor on.
  3. If the screen is on but dim, press Up / + (left) with the menu closed to open the brightness shortcut, then adjust.

The screen is stuck on solid red, green, or blue

The screen went into its factory test mode, usually because it didn’t get enough power the first time you plugged it in. Plug the power adapter that came in the box into the monitor’s USB-C power port and into a wall outlet, then follow the steps in My screen flickers, won't turn on, or is stuck on solid red, green, or blue.

The monitor shows the same image as my laptop (or I want it to)

  • Windows 10 or 11: press the Windows key + P, then choose Extend for a second desktop or Duplicate for the same image.
  • macOS: Apple menu › System Settings › Displays, select the Single Aero, then under Use as choose Extended display or Mirror for Built-in Display.

No sound from the monitor’s speakers

  1. With the menu closed, press Down / – (right) to open the volume shortcut, and turn the volume up.
  2. On your laptop, select the monitor as the sound output device.

Still not working?

Reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screen, and of the cables plugged into the monitor;
  • your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 13, Windows 11);
  • which cables you’re using, which laptop ports they go into, and which power adapter you’re using.

Also searched as: no signal, black screen, screen not working, monitor not detected, not turning on, won’t turn on, dim screen, too dark, power adapter, 45W, not enough power, USB-C not working, USB-C no video, HDMI not working, charging cable, wrong cable, wrong port, mirror instead of extend, duplicate screen, brightness, no sound, volume, Single Aero 18.5 Ultra, Single Aero Pro Studio Ultra, 2.5K portable monitor not working, red screen, green screen, blue screen, factory mode, test mode