Triple Go 14" troubleshooting: black screens, top screen off, driver problems

Short answer: Most problems come from the driver (missing, blocked, or without the Mac screen recording permission) or from missing power for the top screen. Find what you see below and follow the steps.

Only the left and right screens work

The top screen only works when a USB-C PD charger of at least 30 W is plugged into the monitor. Your laptop’s port alone can’t power it.

  1. Plug a USB-C PD charger into the monitor’s free USB-C port: your laptop’s USB-C charger, the 30 W adapter from the box, or any USB-C PD charger or power bank of at least 30 W.
  2. Check that the adapter is plugged into a working outlet.

Triple Go 14" ports on the side of the monitor: two full-function USB-C ports, one for your laptop and one for the PD charger

None of the screens work

All three screens need the RacerUSB driver. None of them work without it.

  1. Install the driver from the USB disk in the box, or download it for Windows 10 or 11 or macOS. Then restart your laptop.
  2. Plug the monitor straight into your laptop. Docking stations are not supported.
  3. On a work computer, your IT team may need to approve the driver.
  4. On a Mac, follow the steps below.

On a Mac, the screens are detected but stay black

  1. Open System Settings › Privacy & Security › Screen Recording (called Screen & System Audio Recording on recent macOS versions).
  2. Turn on UsbDisplay. If it isn’t listed, click +, choose Applications › RacerUSB › UsbDisplay, and click Open.
  3. Restart your Mac, then connect the monitor again.

On a Mac, the startup logo appears, then nothing

  1. Look for the driver icon in the menu bar, at the top right of your screen.
  2. If it isn’t there, open the driver from your Applications folder (RacerUSB › UsbDisplay).

On Windows, the driver doesn’t install by itself

  1. Connect your laptop to the internet, plug in the monitor, and wait a minute.
  2. Still nothing? Install the driver from the USB disk in the box, or download it.
  3. Restart your laptop.

Windows 10 and 11 are supported. Windows XP, 7, and 8 are not.

The screens are in the wrong order, or two screens show the same thing

  • Windows: open Settings › System › Display, click Identify, and drag the screens into place. If two screens appear stacked (2|1 or 2|3), select one and choose Extend desktop to this display under Multiple displays.
  • macOS: open System Settings › Displays › Arrange…, click each icon to see which screen gets a red frame, and drag the icons into place. Make sure no screen is set to Mirror for…

I want to turn one screen off

Turn any screen off, and back on, in your laptop’s display settings.

My laptop doesn’t charge

If your laptop has only one USB-C port, plug its own USB-C charger (60 W or more) into the monitor, and connect the monitor’s other USB-C port to your laptop. The monitor passes the power through to your laptop.

Still not working?

Reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screens and of the cables plugged into the monitor;
  • your laptop model and operating system version (for example, MacBook Air M2, macOS Tahoe 26, or Dell XPS 13, Windows 11);
  • which cables and power adapter you’re using, and the driver version you installed;
  • on a Mac, a screenshot of your Screen Recording settings.

Also searched as: screens not working, all screens black, top screen not working, top screen black, only 2 screens work, no signal, monitors detected but black, Mac recognizes monitors but nothing shows, UsbDisplay, RacerUSB not working, USB Display driver, driver not installing, macOS Tahoe driver, screen recording permission, menu bar icon missing, wrong screen order, mirrored screens, Triple Go Gen 3, Triple Go (Gen 3) 14" Plus, Triple Go 14 Plus