Short answer: Plug your laptop's own USB-C charger (60 W or more) into the monitor, and connect the monitor to your laptop's USB-C port. The monitor passes the power through to your laptop. A 60 W charger isn't included.
Use option 1 whenever your laptop allows it.
Option 1 (recommended): pass-through charging with your laptop's charger
- Unplug your laptop's USB-C charger from the laptop.
- Plug the charger (60 W or more, USB-C end) into one of the two USB-C ports on the side of the monitor.
- Connect the monitor's other USB-C port to your laptop's USB-C port with the short USB-C to USB-C cable, 23.6 in (60 cm).
- Plug the charger into a wall outlet. The monitor powers all three screens and delivers the power to your laptop.

- The 30 W adapter in the box is enough for the monitor, but it isn't meant to charge your laptop through it. Use a charger of 60 W or more for this setup.
Option 2: your laptop also has a USB-A port
- Keep your laptop charging from its own charger as usual.
- Connect the 30 W adapter from the box to one of the monitor's USB-C ports.
- Connect the monitor's other USB-C port to a USB-A port on your laptop with the USB-A to USB-C cable.
Still not working?
- Top screen black: the monitor isn't getting at least 30 W. Check the charger and the outlet.
- No screen at all: check that the RacerUSB driver is installed (see How do I set up my Triple Go 14"?).
Contact us at aura-displays.com/pages/support with your laptop model, the charger's wattage, and a photo of the cables. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).
Helpful links
- All Triple Go 14" help articles
- Do I need the 30 W power adapter?
- Triple Go 14" user manual (PDF)
- Triple Go 14" product page
Also searched as: one USB-C port, single USB-C, charge laptop through monitor, pass-through charging, reverse charging, power delivery, MacBook Air one port, 60W charger, Triple Go Gen 3, Triple Go 14 Plus