To remove the electronic module
Step 1: Power Off
Ensure your Bandou is turned off before beginning. You can turn it off by pressing the play/pause button for 3 seconds (or until the LED light turn off).
Step 2: Access the Slot
Locate the slot at the back of your Bandou. This is where the electronic module and cords can be removed from.
Step 3: Remove the Cords
Carefully pull the cords from the slot. Proceed slowly to avoid damaging them. Make sure to remove the main control module as well as the 2 speakers.
To insert back in the electronic module
Step 1: Locate to longer cord
Take the module and locate the longer cord. That's the speaker that is gonna be placed on the right ear.
Step 2: Insert the controller
Slowly insert the controller in the slot until it fits the logo patch.
Step 3: Insert the right speaker
Slowly insert the right speaker. Place it all the other way around on the right side of the headband. Make sure that the blue side faces the ears (facing the center of the headband, not to exterior).
Step 4: Insert the left speaker
Proceed to insert the left speaker now. This one is easier to place, you can guide yourself by placing it under the controller.
Step 5: Reshape and adjust
Simply reshape the headband and make sur that the speakers are well placed. Adjust on the head of your children if needed. The speakers really need to be close to their ears.
Additional Assistance
If you encounter difficulties or need further guidance, please contact our support team at support@mybandou.com for assistance.
