Step 1: Locate the Charging Port
Find the charging port on your Bandou headphones. It should be found through a slot at the back of the headband, close to the elastic, on the same side as the control module. Slowly pull the charging port out of the headband.
Step 2: Connect the Charger
Use the charging cable provided with your headphones. If you have 2 cables, use the one with the USB port at the end, and not the auxiliary chord. Insert the smaller end of the cable into the charging port on your headphones.
Step 3: Plug into Power Source
Connect the other end of the cable to a power source such as a computer, wall charger, or power bank.
Step 4: Charging Time
Allow your headphones to charge fully. This usually takes about 2-3 hours. You should see a red LED indicator, which confirm it is charging successfully. When that LED indicator turns from red to blue, the headphones are fully charged.
Step 5: Disconnect
Once charged, disconnect the cable from the headphones and the power source. Then tuck the charging port back into the headband.
If you have any issues with charging, simply reach us at Support@mybandou.com
