VOLspeed V4 for Bosch (Non-Smart System)

Our bestselling tuning kit for eBikes powered by non-smart Bosch motors (typically pre-2022 models).

Compatible Motors

Bosch Active Line / Active Line Plus
Bosch Performance Line
Bosch Performance Line CX
Bosch Performance Line Speed
Bosch Cargo Line

Compatible with software versions up to 16.19

Not compatible with: Bosch Smart System motors (bikes from 2023 onwards with round connectors) – shop the Smart System kit here

What Does It Do?

Removes the factory 15.5mph (25km/h) speed limit
Unlocks assisted speeds up to 28mph (45km/h)
Display shows accurate speed readings above the limit
All ride modes work exactly the same, including Walk Mode
Set a custom max speed to suit your riding style
Can be switched on/off at any time using your handlebar controls

Installation Guide

VOLspeed V4 is easy to install with just a few basic tools. In most cases, no specialist skills are required.

PDF Instruction Manual: Download here

Installation Video:

How to Turn Tuning On/Off

Press and hold the minus (–) button on your controller for 3 seconds to toggle tuning on or off.

The kit is completely undetectable – simply remove before getting your bike serviced.

Important: Firmware Updates

Updating your eBike's motor firmware may block or disable your tuning kit.

We recommend avoiding firmware updates – especially through service centres – unless absolutely necessary. Most updates are optional, and a working eBike doesn't usually need one.

Please note: A blocked tuning kit due to a firmware update is not covered under warranty.

Need Help?

If you have any issues with installation or activation, contact us with your bike details and we'll help you out.