Short answer: Yes. A Mac with a base M1, M2, or M3 chip supports only one external display on its own, but the Dual Boost Pro 14" uses the free Silicon Motion driver, which lets both screens work as separate, extended screens. Install the driver and allow it in Screen Recording.
Which Macs are supported?
- Apple chips: M1, M2, M3, M4, and M5, including Pro and Max versions.
- macOS: 13 Ventura, 14 Sonoma, 15 Sequoia, and 26 Tahoe.
Set it up on your Mac
- Click Apple menu › About This Mac to check your macOS version.
- Insert the included USB disk and choose the driver that matches your macOS version, or download it from siliconmotion.com/downloads.
- Drag macOS InstantView to the Applications folder, then open it from Applications.
- Click Open, then Open System Settings.
- In Privacy & Security › Screen Recording (Screen & System Audio Recording on recent macOS versions), turn on macOS InstantView.
- Click CONNECT. An icon appears in the menu bar when it's connected.
- Open System Settings › Displays › Arrange, drag the screens to match where they sit, and choose Extended display.



Only one screen or no screen works?
- Click the driver's icon in the menu bar to check that it's connected.
- Check that Screen Recording is still on for macOS InstantView.
- Press and hold MENU for 5 seconds to check that no screen was turned off, then reconnect the monitor.
- If a screen flickers or shows "No signal," connect a USB-C power adapter (15 W or more) to the monitor's power port.
Still not working?
Contact our support team at aura-displays.com/pages/support with your Mac model and chip, your macOS version, and a screenshot of System Settings › Displays. We're available Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time (CET in winter, CEST in summer).
Helpful links
Also searched as: MacBook Air M1, MacBook Air M2, MacBook Air M3, MacBook Air two screens, only one external display, mirrored screens on Mac, base M1, Apple silicon, InstantView, screen recording permission, Dual Boost Pro 14 Mac