Short answer: Slide out both screens, connect the USB-C cable to your laptop, and install the free DisplayLink driver. One cable runs both screens. The 30 W adapter is only needed on a laptop with USB-A ports only, or to light up the RGB back.
Before you start
- It needs a driver. Both screens need the free DisplayLink driver. It installs in under 2 minutes. On a work computer, your IT team may need to approve it.
- One cable runs both screens. On a laptop with a video USB-C port, that’s all you need.
- The power adapter is required on a laptop with USB-A only. Otherwise it’s only needed for the rear RGB lights.
Slide out the screens
No specific order is required: opening or folding either screen first won’t damage the monitor.
- Press the edge of a screen to pop it out.
- Slide it out horizontally until it’s fully open.
- Do the same with the other screen.
- Open the stand and adjust its angle. The stand opens up to 90°.

Connect it
The monitor has two USB-C ports; each one carries power and video. There are three ways to connect it to a laptop.
Use option 1 whenever your laptop allows it: one USB-C cable to your laptop, and the other cable to the 30 W adapter, which also lights up the RGB back. The USB-C cable alone (option 2) also runs both screens, without the RGB lights.
Option 1 (recommended): one USB-C cable to the laptop + the 30 W adapter
For laptops with a USB-C port that supports video.
- Install the DisplayLink driver first (see below).
- Plug the USB-C to USB-C cable into one of the monitor’s USB-C ports and into your laptop’s USB-C port.
- Plug the 30 W adapter into the monitor’s other USB-C port with the 4.9 ft (1.5 m) power cable, and into an outlet.
Option 2: one USB-C cable alone
For laptops with a USB-C port that supports video, when you don’t need the RGB lights.
- Install the DisplayLink driver first (see below).
- Plug the USB-C to USB-C cable into one of the monitor’s USB-C ports and into your laptop’s USB-C port. No power adapter is needed.

Option 3: USB-A laptop
For laptops with USB-A ports only.
- Install the DisplayLink driver first (see below).
- Put the USB-A adapter head on the end of the video cable, and plug it into your laptop’s USB-A port. Plug the other end into the monitor.
- Plug the 30 W adapter into the monitor’s other USB-C port with the power cable, and into an outlet. It’s required in this setup.

Any USB-C PD wall charger or power bank of at least 30 W can replace the included adapter. You can also connect a desktop computer the same way (with the adapter), or an Android phone, which mirrors on one screen.
Install the DisplayLink driver
macOS
- Open the DisplayLink download page for macOS and click Download for DisplayLink Manager.
- Double-click DisplayLink Software Installer.pkg, click Continue, then Agree.
- Click Open System Settings, go to Privacy & Security › Screen & System Audio Recording, and turn on DisplayLink Manager.

With the driver, both screens work on every Apple silicon Mac, base M1, M2, and M3 included.
Windows 10 or 11
- Open the DisplayLink download page for Windows.
- Click Download, then Install.
- Click Finish.
Other systems
- Ubuntu 20.04, 22.04, or 24.04: DisplayLink for Ubuntu.
- ChromeOS: built in, nothing to install.
- Android: the DisplayLink Presenter app on Google Play.
Arrange your screens
macOS
- Open Apple menu › System Settings › Displays, then click Arrange…
- Drag the screens to match where they really are.
- Choose Main display, Extended display, or Mirror for each screen.
Windows
- Right-click the desktop and choose Display settings.
- Click Detect, then Identify, and drag screens 1, 2, and 3 to match where they really are.
- In Multiple displays, choose Extend or Duplicate. Some apps need to be closed and reopened after a scaling change.
Turn off one screen
- On macOS or Windows: press and hold MENU for 5 seconds.
- On Windows only: in Display settings, select the screen and choose Disconnect this display.
Buttons, on-screen menu, and RGB light
- Power: short-press to turn the monitor on or off. The RGB light turns on and off with it.
- + adjusts the brightness quickly. MENU opens the on-screen menu and confirms. – changes values or closes the menu.
- RGB light: turns on by itself when external power is connected. Press the button on top of the monitor to change the color.
- Changed the menu language by mistake? Press MENU, press + to choose Reset, then press MENU.
Store it and look after it
- Push each screen back into the middle case, then press its edge to lock it.
- Fold the stand.
- Clean the screens with a screen wipe, unplugged, and never with cleaners that contain alcohol or acid.
- Keep it away from humidity and dust, and don’t squeeze the screens.
Still not working?
See the Dual Flow Pro Max 15.6" troubleshooting article, or reach out to our support team at aura-displays.com/pages/support and include:
- a photo or short video of the screens and of the cables plugged in;
- your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 13, Windows 11);
- which cables and ports you’re using.
Helpful links
- All Dual Flow Pro Max 15.6" help articles
- Dual Flow Pro Max 15.6" user manual (PDF)
- Dual Flow Pro Max 15.6" Quick Start (PDF)
- Dual Flow Pro Max 15.6" product page
- DisplayLink driver: Windows · macOS · Ubuntu · Android · ChromeOS: built in, nothing to install
Also searched as: how to set up, slide out screens, how to open, how to close, lock screens, one cable, USB-A, power adapter, DisplayLink, DisplayLink Manager, screen recording permission, install driver, display settings, extend, turn off one screen, RGB light, change color, OSD menu, language reset, Dual Flow, Dual Flow Pro Max, slide-out dual monitor