Short answer: Each screen needs its own cable and its own video port on your laptop; a screen connected by HDMI needs a USB power cable, and a MacBook with a base M1, M2, or M3 chip runs only one external display. Find what you see below and follow the steps.
Only one screen works
- MacBook with a base M1, M2, or M3 chip (not Pro or Max)? These Macs drive only one external display, so only one screen can work. To run both, add the H5T adapter (sold separately) and install its free Silicon Motion app for macOS.
- Give each screen its own cable and its own laptop port. One cable runs one screen.
- Use video ports only. USB-A ports don’t carry video, and some USB-C ports don’t either (look for USB-C with DisplayPort, or Thunderbolt 3/4). If a USB-C port gives no picture, try another one, or connect that screen with a Mini HDMI to HDMI cable.
- Check the input. On the dark screen, press MENU, go to Source, and choose the port you’re using: Type-C1, Type-C2, or HDMI.

The screen connected by HDMI doesn’t turn on
The Mini HDMI port carries video only: it doesn’t power the screen. Plug a USB-A to USB-C power cable (two are in the box) into one of that screen’s USB-C ports and into a USB power source that delivers 5V/3A (15 W) or more, such as a USB wall charger (not included).

A screen flickers, goes dark, or turns off
Its power supply is too weak, often because the laptop’s USB-C port can’t supply 5V/3A, especially with the brightness above 50.
- Plug a USB-A to USB-C power cable into that screen’s other USB-C port and into a 5V/3A (15 W) or higher USB power source.
- Or lower the brightness with the – button.

Both screens show the same picture
- Windows: open Settings › System › Display, select each screen, and choose Extend these displays in Multiple displays.
- macOS: open System Settings › Displays, click each screen (Dual Play-L or Dual Play-R), and set it as Extended display instead of mirror.
The picture is upside down
- Windows: in Settings › System › Display, select that screen and choose Landscape (flipped) under Orientation.
- macOS: In System Settings › Displays, select that screen and change the Rotation.
It shakes or doesn’t hold on my laptop
- Make sure the bracket clamps the back of your laptop screen firmly, and pull the built-in stand out to its end.
- Laptop screen 0.24 in (6 mm) thick or less? Slide a protective cap onto each clamp. Six caps are in the box.
- Check that your laptop fits: 15.6 in to 17.3 in, a screen lid 13.5 in to 18.19 in (343 to 462 mm) wide, and up to 0.33 in (8.5 mm) thick.
Connecting a phone
A compatible iPhone or Android phone (including Samsung DeX) mirrors its screen on one screen of the monitor.
Still not working?
Reach out to our support team at aura-displays.com/pages/support and include:
- a photo or short video of the screens and of the cables plugged in;
- your laptop model, its chip (for Macs), and operating system version;
- which cables you’re using and which laptop ports they go into;
- a screenshot of your display settings.
Helpful links
- Dual Play user manual (PDF), covers the Dual Play Max
- All Dual Play Max 15.6" help articles
- Dual Play Max 15.6" product page
- H5T adapter app (base M1, M2, M3 Macs only): Silicon Motion for macOS
Also searched as: only one screen works, second screen not working, one screen black, MacBook Air M1 only one screen, M2, M3, two external displays Mac, H5T adapter, no signal, source, HDMI not working, HDMI screen black, HDMI no power, power cable, 5V 3A, flicker, flickering, screen turns off, upside down, flipped, both screens same image, mirror, extend, shaking, wobbly, loose, protective caps, phone, iPhone, Samsung DeX, clip-on dual monitor, Dual Play 15.6 inch, Dual Play Max