How do I set up my Dual Play 14"?

Short answer: Clip the Dual Play 14" onto the back of your laptop screen, then connect each of its two screens to its own video port on your laptop (USB-C or HDMI). A screen connected by HDMI also needs a USB power cable. No driver is needed, except to run both screens on a MacBook with a base M1, M2, or M3 chip.

Before you start

  • One cable per screen. Each screen connects to its own video USB-C or HDMI port on your laptop.
  • Power: no power adapter is in the box. Over video USB-C, your laptop powers the screen if its port supplies 5V/3A or more. A screen connected by HDMI always needs extra power (see "Connect it").
  • Fits laptops from 14 in to 17.3 in, with a screen lid 12.13 in to 16.81 in (308 to 427 mm) wide and up to 0.33 in (8.5 mm) thick.
  • MacBook with a base M1, M2, or M3 chip (not Pro or Max)? These Macs drive only one external display, so only one screen will work unless you add the H5T adapter (sold separately), which needs free software.

Know your ports and buttons

Each screen has its own ports and buttons:

  • USB-C 1 and USB-C 2 (full-function): video and power. Use either one for the cable to your laptop, and the other for extra power if you need it.
  • Mini HDMI: video only. It doesn't power the screen.
  • MENU, +, and – buttons: open the on-screen menu and adjust the brightness.

Side of a Dual Play screen with its ports and buttons labeled: 1 minus button, 2 plus button, 3 MENU button, 4 Mini HDMI port (video only), 5 USB-C 2 full-function port, 6 USB-C 1 full-function port

Clip it onto your laptop

  1. Unpack the monitor and open the two screens.
  2. Place the center bracket on the back of your laptop screen, and make sure it clamps the laptop screen firmly.
  3. Lift up the built-in stand on the back of the monitor and pull it out to its end for support. To retract it, press and hold its button.
  4. Ultra-thin laptop? If your laptop screen is 0.24 in (6 mm) thick or less, slide a protective cap onto each bracket clamp first. They reduce shaking. Six caps are in the box.

Installing the Dual Play on a laptop in five steps: unpack it, open the two screens, clamp the bracket on the back of the laptop screen, pull out the stand, and plug in the cables

Each screen swivels up to 180°. Never force a screen past that point, and don't press on the screens.

Connect it

There are three ways to connect it, depending on your laptop’s ports. Each screen always takes one cable to its own video port on your laptop.

Use option 1 whenever your laptop allows it: one USB-C cable per screen, and usually no extra power.

For laptops with two USB-C or Thunderbolt 3/4 ports that support video and supply 5V/3A or more.

  1. Connect the left screen to a USB-C port on your laptop with a USB-C to USB-C cable.
  2. Connect the right screen to another USB-C port with the second USB-C to USB-C cable.

Dual Play connected to a laptop with two USB-C to USB-C cables, one for the left screen and one for the right screen

A screen flickers, goes dark, or turns off? Your laptop's port can't supply enough power, especially with the brightness above 50. Plug a USB-A to USB-C power cable into that screen's other USB-C port and into a USB power source that delivers 5V/3A (15 W) or more, such as a USB wall charger (not included).

Option 2: one USB-C cable + one HDMI cable

  1. Connect one screen to your laptop’s video USB-C port with a USB-C to USB-C cable.
  2. Connect the other screen to your laptop’s HDMI port with a Mini HDMI to HDMI cable.
  3. Power the HDMI screen: plug a USB-A to USB-C power cable into one of its USB-C ports and into a 5V/3A (15 W) or higher USB power source (not included).

Dual Play with the left screen on USB-C and the right screen on HDMI, the HDMI screen powered by a USB-A to USB-C cable plugged into a 5V/3A power supply

Option 3: two HDMI cables

  1. Connect each screen to an HDMI port on your laptop with a Mini HDMI to HDMI cable. Two are in the box.
  2. Power each screen with a USB-A to USB-C power cable (two are in the box), each plugged into a 5V/3A (15 W) or higher USB power source (not included).

Only one HDMI port? Connect the second screen through an HDMI hub (not included), with its own power cable.

Not sure what your ports support? Some USB-C ports carry no video, and USB-A ports never do: check your laptop’s specifications.

Do I need a driver?

  • Windows, macOS, and Ubuntu: no. It’s plug and play.
  • MacBook with a base M1, M2, or M3 chip: only one screen works on its own. To run both, add the H5T adapter (sold separately), which uses the free Silicon Motion app for macOS.

Arrange your screens

  • Windows: open Settings › System › Display, click Identify, drag the screens to match where they are, and choose Extend these displays in Multiple displays. Picture upside down? Select that screen and choose Landscape (flipped) under Orientation. Text too small? Set Scale to 150%.
  • macOS: open System Settings › Displays. The screens appear as Dual Play-L and Dual Play-R. Set each one as an Extended display, then click Arrange… and drag them into place. Picture upside down? Change it in the Rotation menu.

On-screen menu

Each screen has its own menu: adjust each screen with its own buttons.

  1. Press MENU to open the menu.
  2. Press + to move to a setting, and MENU to confirm.
  3. Long-press MENU to go back to the previous page.

Outside the menu, + and – raise and lower the brightness. In the menu, you can set brightness, contrast, picture mode (ECO), dynamic contrast (DCR), sharpness, aspect ratio, color temperature, language, low blue light, HDR mode, and the input Source (Type-C1, Type-C2, or HDMI), or reset everything to factory settings.

Fold it away

Unplug the cables, unclip the monitor, and fold the screens before you carry it. One screen stays exposed when folded, and the shell scratches more easily than our other models, so keep it in a sleeve when you travel.

Still not working?

See the Dual Play 14" help articles, or reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screens, the bracket on your laptop, and the cables plugged in;
  • your laptop model, its chip (for Macs), and operating system version;
  • which cables you’re using and which laptop ports they go into.

Also searched as: how to set up, how to attach, clip-on dual monitor, clamp, bracket, stand, kickstand, protective caps, thin laptop, which cable, which port, two USB-C cables, HDMI, mini HDMI, HDMI no power, power cable, 5V 3A, flicker, power, display settings, extend, upside down, OSD menu, source, brightness, MacBook Air base M1 one screen, H5T, attachable dual screen, laptop screen extender, user manual, Dual Play 14 inch