Triple Aero Pro Max 16" Ultra troubleshooting: only some screens work, colors, restarting

Short answer: Most problems come down to how the Triple Aero Pro Max 16" Ultra is connected, its power, or the free DisplayLink driver it needs. Find what you see below and follow the steps.

Before you start

  1. Plug the monitor into its power adapter: the USB-C power cable goes into the PD port, and the adapter goes into a wall outlet. The monitor needs outside power however you connect it. Use the 45 W adapter that came in the box.
  2. Use the cables that came in the box. Not every USB-C cable carries video.
  3. Check the setup: use option 1 whenever your laptop allows it (one USB-C cable to your laptop, one cable to the power adapter). See How do I set up my Triple Aero Pro Max 16" Ultra? for all three options.
  4. Unplug the cables and plug them back in, making sure both ends are fully connected.

Only the left screen works

The left screen is the one that works without a driver. The middle and right screens need the driver.

  1. Install the DisplayLink driver. Download it for Windows 10 or 11, macOS, or Ubuntu 20.04, 22.04, or 24.04. Run the installer, follow the prompts, then plug the monitor back in. On a Chromebook, there’s nothing to install. On a work computer, your IT team may need to approve the install.
  2. On a Mac, allow screen recording. Open System Settings › Privacy & Security › Screen & System Audio Recording and turn on DisplayLink Manager. Without this permission, macOS keeps the extra screens dark. If DisplayLink Manager isn’t in the list, click + and add it from your Applications folder.

    macOS System Settings, Privacy and Security, Screen and System Audio Recording, with DisplayLink Manager turned on.

  3. Using only one HDMI cable? One HDMI cable runs one screen. Switch to one USB-C cable if your laptop’s USB-C port supports video, otherwise to one USB-A cable plus one HDMI cable.

Good to know for Mac users: with the driver installed, all three screens work on every Apple silicon Mac, including base M1, M2, and M3 models, which normally support only one external display.

Only the middle and right screens work

Your laptop’s USB-C port sends data but not video, so the left screen gets no signal.

  1. Keep the USB cable plugged in.
  2. Add one HDMI cable from your laptop to the first HDMI port on the monitor, next to PD.

Back of the Triple Aero: USB cable in the TYPE-C port, power cable in PD, and one HDMI cable added in the first HDMI port to light up the left screen.

Only the middle screen, or only the right screen, works

An HDMI cable plugged into the middle or right HDMI port lights up that screen only. Fix it one of these ways:

  • Switch to one USB-C cable, or
  • Use three HDMI cables, one per screen.

None of the screens turn on, or the monitor isn’t detected

  1. Check that the power adapter is plugged into the monitor’s PD port and into a working outlet.
  2. Press and hold the Menu/Power button for 2 to 3 seconds to turn the monitor on.
  3. Unplug the cables and plug them back in, making sure they’re securely connected at both ends.
  4. Make sure the DisplayLink driver is installed (see “Only the left screen works” above).
  5. Unplug your laptop’s own charger, then connect the monitor again.
  6. On a Mac: check that DisplayLink Manager is allowed in Screen & System Audio Recording (see “Only the left screen works” above).

All three screens show the same image

Your computer is mirroring (duplicating) the screens instead of extending them. Mirror or Duplicate shows the same image on every screen; Extend gives each screen its own content.

  • Windows: open Settings › System › Display and choose Extend these displays.
  • Mac: switch the display mode to extend in DisplayLink Manager, or open System Settings › Displays, select each Aura screen, and set Use as to Extended display.

A screen flickers

  1. Unplug the cables and plug them back in firmly.
  2. Try another cable of the same type, for example another full-featured USB-C video cable.
  3. Try another port on your laptop.
  4. Check the cable connectors and the ports for dust, bent pins, or oxidation.

Colors look different between screens

  1. Use the monitor’s buttons to open the on-screen (OSD) menu on each screen, and make sure the display mode and settings are the same on all three.
  2. On a Mac: open System Settings › Displays and turn off True Tone if it’s on.
  3. On a Mac: each screen has its own settings. Check that the color profile and brightness match on every screen.

The monitor keeps restarting

  1. Check the power adapter. Use the 45 W adapter that came in the box, or another adapter with enough power.
  2. Check the power cable. Use the USB-C power cable that came in the box, or another cable that can handle the same power.

The screens are in the wrong order

If all three screens work but your mouse doesn’t move across them in the right order:

  • Windows: open Settings › System › Display, click Identify to see each screen’s number, drag the displays to match where they actually sit, then click Apply.
  • Mac: open System Settings › Displays, click Arrange, drag the displays to match where they actually sit, then click Done.

More details: How do I arrange, extend, mirror, or rotate my screens on Windows and Mac?

A side screen doesn’t line up with the middle screen

If a side screen sits higher, lower, or at an angle compared with the middle screen:

  1. Fully close that side screen.
  2. Gently adjust it by hand so its top edge lines up with the top edge of the middle screen.
  3. Open it again and check the alignment.

Go slowly and gently. Don’t force the hinges or turn them further than they’re meant to go. If a hinge is loose, damaged, or broken, contact our support team (see “Still not working?” below).

The stand or a hinge looks damaged

If the stand, the support rod, or a hinge looks damaged or bent:

  • Don’t force the stand or the hinge.
  • Place the monitor on a stable, flat surface.
  • Don’t take the monitor apart or try to repair it yourself.

Contact our support team (see “Still not working?” below) and include a photo.

Which cable does what

  • Black USB-C to USB-C cable (video): the full-featured cable from the box. Use it between your laptop and the monitor’s TYPE-C port. A charging-only USB-C cable may not carry video.
  • White USB-C to USB-C cable (power only): connects the power adapter to the monitor’s PD port. Don’t use it for video.

Can the monitor charge my laptop?

No. The Triple Aero Pro Max 16" Ultra doesn’t pass power to your laptop, so keep your laptop’s own charger plugged in.

Still not working?

Reach out to our support team at aura-displays.com/pages/support and include:

  • your computer model (for example, MacBook Air M2 or Dell XPS 13);
  • your Windows or macOS version (for example, Windows 11 or macOS Sequoia);
  • your Aura model: Triple Aero Pro Max 16" Ultra;
  • how you connected it (for example, one USB-C cable, or one USB-A cable plus one HDMI cable);
  • which cables you’re using and which laptop ports they go into;
  • which driver you installed, and its version;
  • a photo or short video of the problem, and of the back of the monitor showing which cables are plugged in where.

Our team answers Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time.

Also searched as: only one screen works, one monitor not working, 2 screens not working, second and third screen black, middle screen not working, right screen not working, left screen only, extra screens not detected, no signal, triple screen not working, DisplayLink not working, DisplayLink Manager, screen recording permission, colors different, True Tone, monitor keeps restarting, charge my laptop, pass-through charging, Triple Aero 16 Ultra, Triple Aero Pro Max 16 QHD, Triple Aero 16 inch 2.5K, Magnetic Silver, same image on all screens, mirror, duplicate, extend, flickering, screens in wrong order, Identify, Arrange, side screen not aligned, hinge out of sync, hinge loose, stand damaged, white cable, black cable, power-only cable