How do I set up my Triple Book Pro Max 15.6"?

Short answer: Install the free Silicon Motion driver first (it's on the USB disk in the box), then connect two cables: one USB-C cable from your laptop to the monitor's full-function Type-C port, and the 65W power adapter to its PD port. All three screens then work, on Windows and on every Apple silicon Mac, including base M1, M2, and M3 models.

Before you start

  1. Check your laptop's ports. The simplest setup needs one full-featured USB-C port with video output (Thunderbolt 3 and 4 ports work).
  2. Use the cables that came in the box. Not every USB-C cable carries video.
  3. Find room on your desk: the monitor stands on its own stand behind your laptop, and it's wide when open.

Know your ports and button

All the ports are on the bottom edge of the screens, at the back:

  • Type-C port (full-function): video, data, and power. This is the port for the cable to your laptop.
  • PD charging port (Type-C): for the power adapter only.
  • Mini HDMI port: video from your laptop's HDMI port.
  • Multi-function button: press it, or toggle it up and down (see "Buttons and on-screen menu" below).
  • VESA mounting holes: 75 × 75 mm (2.95 × 2.95 in), M4 screws.

Back of the Triple Book Pro Max 15.6 with the screens unfolded, labeled: 1 multi-function button, 2 PD charging port (Type-C), 3 Mini HDMI port, 4 full-function Type-C port, 5 VESA mounting holes

Once mounted, the screens are numbered from top to bottom: Screen 1 = top, Screen 2 = middle, Screen 3 = bottom.

Step 1: Unfold and mount the screens

Follow this order to avoid damaging the monitor.

  1. Rotate the magnetic turntable to the horizontal position.
  2. Open the outer cover on the left, then the outer cover on the right.
  3. Take the screens out, upwards. They unfold like a book.
  4. Insert the support rod into the positioning hole of the bracket base plate.
  5. Adjust the handle to the angle you want.
  6. Align the screen mounting holes with the magnetic bracket and let the magnets hold the screens in place. Mount them with the ports facing right and the logo facing down.

Unfolding the Triple Book Pro Max 15.6: rotate the magnetic turntable to horizontal, open the left cover, open the right cover, take the screens out upwards, and unfold them like a book

You can use the screens stacked (landscape), side by side (portrait), or upright behind your laptop screen. To change the angle, move the handle, never the screens themselves.

Step 2: Install the driver

Without the driver, only one of the three screens works. The driver is free and installs in under 2 minutes.

  1. Plug the USB disk from the box into your computer, or download the Silicon Motion driver for Windows, macOS, or Ubuntu.
  2. Windows: run SMIUSBDisplay (SMIUSBdisplaysW.exe) from the USB disk and follow the prompts.
  3. Mac: install macOS InstantView from the USB disk and follow the on-screen instructions. Then open System Settings › Privacy & Security › Screen & System Audio Recording and turn on macOS InstantView. Without this permission, macOS keeps the extra screens dark.
  4. Restart your computer if the installer asks you to.

On a work computer, your IT team may need to approve the install. It's the same industry-standard, secure technology used in docking stations from major brands.

Step 3: Connect it

The monitor always needs the power adapter on its PD port, however you connect it. The box includes two USB-C to USB-C cables: one for video (to your laptop) and one for the power adapter.

Use option 1 whenever your laptop allows it. It's the simplest setup: one cable to your laptop, one cable to the power adapter.

For laptops with a full-featured USB-C port. Runs all three screens.

  1. Plug a USB-C to USB-C cable into the monitor's full-function Type-C port and into your laptop's USB-C port.
  2. Plug the second USB-C to USB-C cable into the monitor's PD port and into the 65W power adapter, then plug the adapter into a wall outlet.

Triple Book Pro Max 15.6 connected to a laptop with one USB-C to USB-C cable, and powered by the adapter on the PD port: Screens 1, 2, and 3 display

Option 2: USB-A cable + HDMI cable + the power adapter

For laptops without a full-featured USB-C port, with a USB-A port and an HDMI port. Runs all three screens.

  1. Plug the USB-A to USB-C cable into the monitor's Type-C port and into a USB-A port on your laptop. With the driver installed, this runs Screen 1 and Screen 2.
  2. Plug the mini HDMI to HDMI cable into the monitor's Mini HDMI port and into your laptop's HDMI port. This runs Screen 3 (bottom).
  3. Connect the 65W power adapter to the monitor's PD port.

Triple Book Pro Max 15.6 connected with a USB-A to USB-C cable and a mini HDMI to HDMI cable, plus the power adapter on the PD port: Screens 1, 2, and 3 display

Laptop with USB-A only and no HDMI port? You'll get two of the three screens (Screen 1 and Screen 2).

Option 3: HDMI only

One HDMI cable runs one screen (Screen 3, the bottom one), with no driver. Connect the mini HDMI to HDMI cable to the Mini HDMI port, and the power adapter to the PD port.

Step 4: Arrange your screens

Windows 10 or 11

  1. Right-click a blank area of the desktop and select Display settings.
  2. Click Identify, then drag the screens to match where they sit on your desk (Screen 1 = top, Screen 2 = middle, Screen 3 = bottom).
  3. Under Multiple displays, choose Extend these displays.

macOS

  1. Open Apple menu › System Settings › Displays. The screens appear as Triple Book-1, Triple Book-2, and Triple Book-3.
  2. Click Arrange… and drag the screens to match where they sit on your desk.
  3. Select each screen and choose Extended display. To mirror instead, hold the Option key while you drag one display onto another.

The screens rotate 360°, so you can also use them in portrait. Set the picture's orientation in your display settings.

Sound

The monitor has built-in speakers.

  • Windows: right-click the speaker icon in the taskbar, select Open Sound settings, and choose Triple Book (or your laptop speakers) as the output.
  • macOS: open System Settings › Sound › Output and choose Triple Book (or your laptop speakers).

Buttons and on-screen menu

The multi-function button is pressed in the middle and toggled up (+) or down (–).

  • Press: open the menu, then select and confirm.
  • Toggle up or down: move in the menu, or change a value. Outside the menu, up changes the volume and down changes the backlight.
  • Hold the middle for 2 seconds: go back to the previous menu. 3 seconds: turn the screen off.
  • Toggle down and hold for 3 seconds: turn all three screens off. Do it again to turn them back on.
  • Toggle up and hold for 3 seconds: one-key large screen mode, which joins the screens into one big screen (2160 × 1280, 60 Hz). Do it again to exit. It needs a signal on the Mini HDMI port and the monitor's Type-C port connected to a full-function USB-C port on your laptop.

In the menu, you can adjust brightness, color, sharpness, image aspect, language, timer, source, low blue light, HDR mode, and volume.

Fold it and carry it

  1. Unplug the cables and take the screens off the stand. Keep your hands away from the screen surfaces.
  2. Open the main body of the bracket to the left and remove the support bracket.
  3. Put the support rods back in their storage slots.
  4. Open the stand, insert the screens, and close the stand.
  5. Lock the magnetic base. Always lock it before you carry the monitor, or the screens could fall out and break.
  • When folded, one screen stays exposed, so handle it with care.
  • Folded, it fits a large backpack or a carry-on.

Still not working?

Check the troubleshooting article in all Triple Book Pro Max 15.6" help articles, or reach out to our support team at aura-displays.com/pages/support and include:

  • a photo or short video of the screens, and of the monitor's ports showing which cables are plugged in where;
  • your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 15, Windows 11);
  • which cables you're using, which laptop ports they go into, and whether the driver is installed.

Also searched as: how to set up, how to connect, which cable, which port, PD port, Type-C port, install driver, Silicon Motion, USB Display, SMIUSBDisplay, InstantView, USB disk driver, driver USB stick, screen recording permission, only one screen works, power adapter, 65W, USB-A, HDMI, mini HDMI, MacBook Air M1, MacBook Air M2, MacBook Air M3, three screens, triple monitor, stacked, above laptop, portrait, unfold, mount screens, magnetic bracket, fold, store, large screen mode, one big screen, speakers, sound, volume, VESA, user manual, quick start, Triple Book, Triple Book 15.6, Triple Book Pro Max, triple screen laptop extender