Short answer: Almost every problem with the Triple Aero Pro Max 15.6" Lite comes down to the driver or to power. Install the free Silicon Motion driver, and plug the included 30 W adapter into the monitor if your laptop can’t supply 30 W. Find what you see below and follow the steps.
The screens show “No signal”
None of the three screens work without the driver, and the monitor needs at least 30 W of steady power.
- Install the Silicon Motion driver. Use the USB disk in the box, or download it from the official Silicon Motion download site or the Silicon Motion SM770 driver page. On a work computer, your IT team may need to approve it.
- On a Mac, allow screen recording. Open System Settings › Privacy & Security › Screen & System Audio Recording (called Screen Recording on older macOS versions) and turn on macOS InstantView. If it isn’t in the list, click + and add it from your Applications folder. Then open macOS InstantView and click CONNECT.
- Plug in the 30 W adapter. If your laptop can’t supply 30 W, connect the included 30 W adapter to the monitor’s Type-C power port and to a wall outlet.
- Check your laptop port. Use a full-featured USB-C port that supports video. No such port? Fit the USB-A head on the cable, plug it into a USB-A port, and keep the 30 W adapter plugged in.
- Try another cable. The cable may be damaged. A replacement must be a full-featured USB-C to USB-C cable (USB 3.1 or later) that supports video.
- Reconnect the cables. Unplug them and plug them back in, making sure they’re securely connected at both ends.
- Unplug your laptop’s own charger, then connect the monitor again.


Only one or two screens work
- Unplug the cables and plug them back in, making sure both ends are fully connected.
- Use the full-featured USB-C video cable that came in the box.
- If your laptop’s USB-C port doesn’t support video, fit the USB-A head on the cable, plug it into a USB-A port, and keep the 30 W adapter plugged in.
- Make sure the Silicon Motion driver is installed (see “The screens show ‘No signal’” above).
- Still not working? Try another port on your laptop, or the other connection (USB-C or USB-A).
A screen flickers or disappears for a moment
Your laptop battery is probably low and can’t power the monitor.
- Plug the included 30 W adapter into the monitor’s Type-C power port and into a wall outlet.
- Plug your laptop into its own charger.
Still flickering?
- Unplug the cables and plug them back in firmly.
- Try another full-featured USB-C video cable.
- Try another port on your laptop.
- Check the cable connectors and the ports for dust, bent pins, or oxidation.
The screens went black
When your laptop goes to sleep, the monitor goes to sleep too.
- Wake up your laptop.
- Press the monitor’s power button to wake it up.
All three screens show the same image
Your computer is mirroring (duplicating) the screens instead of extending them. Mirror or Duplicate shows the same image on every screen; Extend gives each screen its own content.
- Windows: open Settings › System › Display and choose Extend these displays.
- Mac: switch the display mode to extend in macOS InstantView, or open System Settings › Displays, select each Aura screen, and set Use as to Extended display.
Colors look different between screens
- Use the monitor’s buttons to open the on-screen (OSD) menu on each screen, and make sure the display mode and settings are the same on all three.
- On a Mac: open System Settings › Displays and turn off True Tone if it’s on.
- On a Mac: each screen has its own settings. Check that the color profile and brightness match on every screen.
The screens are in the wrong order
If all three screens work but your mouse doesn’t move across them in the right order:
- Windows: open Settings › System › Display, click Identify to see each screen’s number, drag the displays to match where they actually sit, then click Apply.
- Mac: open System Settings › Displays, click Arrange, drag the displays to match where they actually sit, then click Done.
More details: How do I arrange, extend, mirror, or rotate my screens on Windows and Mac?
The stand feels unstable
- Open the kickstand all the way.
- Open all three screens fully: the right screen first, then the left.

A side screen doesn’t line up with the middle screen
If a side screen sits higher, lower, or at an angle compared with the middle screen:
- Fully close that side screen.
- Gently adjust it by hand so its top edge lines up with the top edge of the middle screen.
- Open it again and check the alignment.
Go slowly and gently. Don’t force the hinges or turn them further than they’re meant to go. If a hinge is loose, damaged, or broken, contact our support team (see “Still not working?” below).
The stand or a hinge looks damaged
If the stand, the support rod, or a hinge looks damaged or bent:
- Don’t force the stand or the hinge.
- Place the monitor on a stable, flat surface.
- Don’t take the monitor apart or try to repair it yourself.
Contact our support team (see “Still not working?” below) and include a photo.
The menu is in the wrong language
- Press MENU.
- Press + to choose Reset, then press MENU. All menu settings go back to their defaults.
I want to turn off one screen
- macOS or Windows: press and hold the MENU button for 5 seconds.
- Windows only: in Display settings, select the screen and choose Disconnect this display.
Which cable does what
- Video cable: the full-featured USB-C to USB-C cable with the USB-A head. Use it between your laptop and the monitor. A charging-only USB-C cable may not carry video.
- Power cable: the USB-C to USB-C cable that connects the 30 W adapter to the monitor’s Type-C power port. It’s for power only: don’t use it for video.
Still not working?
If a screen stays black, flickers, or doesn’t work, don’t try to repair it yourself. Reach out to our support team at aura-displays.com/pages/support and include:
- your computer model (for example, MacBook Air M2 or Dell XPS 13);
- your Windows or macOS version (for example, Windows 11 or macOS Sequoia);
- your Aura model: Triple Aero Pro Max 15.6" Lite;
- how you connected it (USB-C, or USB-A with the USB-A head), and whether the 30 W adapter is plugged in;
- which cables you’re using and which laptop ports they go into;
- which driver you installed, and its version;
- the color of the indicator light (green or red);
- a photo or short video of the problem, and of the cables plugged into the monitor.
Our team answers Monday to Friday, 9 AM to 5 PM (CET), following European summer and winter time.
Helpful links
- All Triple Aero Pro Max 15.6" Lite help articles
- How do I set up my Triple Aero Pro Max 15.6" Lite?
- Triple Aero Pro Max 15.6" Lite user manual (PDF): see “FAQ”
- Quick Start card (PDF)
- Triple Aero Pro Max 15.6" Lite product page
- Silicon Motion driver: official download site · Windows · macOS · Ubuntu · Android
Also searched as: no signal, screens not working, black screen, flickering, screen goes off, blinking, wakes from sleep, not detected, driver not working, Silicon Motion, SM770, SMI USB Display, InstantView, screen recording, power adapter, 30W, low battery, unstable stand, wobbly, wrong language, reset menu, red light, Triple Aero Lite, Triple Aero 15.6 Lite, only one screen works, two screens work, same image on all screens, mirror, duplicate, extend, screens in wrong order, Identify, Arrange, side screen not aligned, hinge out of sync, hinge loose, stand damaged, power-only cable, video cable