Short answer: Many Aura monitors, and the H5T adapter, use the free Silicon Motion driver. On a Mac it's the macOS InstantView app; on Windows it's SMI USB Display. Install it from the included USB drive or from the Silicon Motion download page, allow it on your Mac, then use the fixes below if a screen stays dark.
Which Aura monitors use Silicon Motion?
- Triple Aero Pro Max 15.6" (Full HD): only units without a red peel tab on the screens. With the tab, your monitor uses DisplayLink. Tab already removed? Try DisplayLink first, then Silicon Motion.
- Triple Aero Pro Max 15.6" Lite (Full HD)
- Triple Book Pro Max 15.6" (Full HD)
- Dual Boost 14" (Full HD)
- Dual Boost Pro 14" (Full HD)
- Dual Boost Pro Max 15.6" (Full HD)
- Dual Boost Pro Max 15.6" Ultra (QHD 2.5K)
- Dual Boost Pro Max 15.6" Slim (Full HD)
- Dual Boost Pro Studio 18.5" (Full HD)
- Triple Boost Pro 14" (Full HD)
- Triple Boost Pro Max 15.6" (Full HD)
- Triple Boost Pro Studio 18.5" (Full HD)
Using the H5T adapter? It uses the same driver. See "H5T adapter" below.
Before you install
- The driver is on the USB drive in the box. You can also download the latest version from the official Silicon Motion download site or the Silicon Motion download page. Download it only from these official sites.
- On a work computer, your IT team may need to approve the install. See "Work computer" below.
- Good to know for Mac users: with the driver installed, every screen works on all Apple silicon Macs, including base M1, M2, and M3 models, which normally support only one external display.
Install on Windows 10 or 11
- Insert the included USB drive into your laptop and open the Windows driver folder. Or download the Windows driver from the Silicon Motion download page.
- Open SMIUSBDisplay SW.
- Click INSTALL, then connect the monitor.
- Go to Settings › System › Display. Check that every screen is detected. If a screen is set to Disconnect this display, change it to Extend desktop to this display.

Install on a Mac (macOS 13 Ventura or later)
- Click Apple menu › About This Mac to check your macOS version.
- Insert the included USB drive and choose the driver that matches your macOS version. Or download it from the Silicon Motion download page.
- Drag macOS InstantView to your Applications folder, then open it from there.
- Click Open, then Open System Settings.
- Go to Privacy & Security › Screen Recording (called Screen & System Audio Recording on recent macOS) and turn on macOS InstantView. Without this permission, macOS keeps the extra screens dark. If macOS InstantView isn’t in the list, click + and add it from your Applications folder.
- Click CONNECT. When it's connected, a screen icon appears in the menu bar.
- In System Settings › Displays, drag the screens to match your desk.



Install on Ubuntu 20.04, 22.04, or 24.04
- Download the Ubuntu driver from the Silicon Motion download page.
- Install it, then connect the monitor.
- Go to Settings › Displays to arrange the screens.
ChromeOS
Plug in the monitor: on a Chromebook, it extends onto all screens. Then go to Settings › Device › Displays to arrange the screens. Chromebooks are not tested with the Dual Boost Pro Max 15.6" Slim or the Triple Book Pro Max 15.6".
Android phones (Android 8.0 or later)
- Install the free USB Display app from Google Play, or install the Android driver from the included USB drive with your phone's file manager app.
- Connect your phone. Your phone's screen is mirrored on the monitor.
Not every phone supports an external display: it depends on the phone's USB-C port. Android phones are not tested with the Dual Boost Pro Max 15.6" Slim or the Triple Book Pro Max 15.6".
H5T adapter (Dual Air, Dual Go, Dual Play, Dual Snap)
These monitors need no driver for everyday use. You only need the Silicon Motion driver when you use the H5T adapter (USB to HDMI):
- to run the second screen on a MacBook with a standard M1, M2, or M3 chip (not Pro or Max), which supports only one external display over USB-C;
- on a laptop without a USB-C port that supports video (Dual Air models).
Where the H5T adapter comes from:
- In the box: Dual Air 14" (Full HD), Dual Air Max 15.3" (Full HD+)
- Sold separately: Dual Go 14" (Full HD+), Dual Go 14" Ultra (QHD 2.5K), Dual Go Max 15.6" (Full HD), Dual Play 14" (Full HD), Dual Play Max 15.6" (Full HD), Dual Snap 16" Ultra (QHD 2.5K)
- Install the Silicon Motion driver for your system (see the steps above).
- Plug the H5T adapter into a USB port on your laptop, and connect it to the monitor with the monitor's HDMI cable.
- On the Dual Air and Dual Go monitors, a screen connected over HDMI needs power: connect a power adapter, or a USB-C port that delivers power, to the monitor's power port. See your model's manual for details.
MacBooks with an M1, M2, or M3 Pro or Max chip, or any M4 or M5 chip, run both screens over USB-C without the adapter.
The screens stay dark after my laptop wakes from sleep
When your laptop goes to sleep, the monitor goes to sleep too.
- Wake your laptop, then press the monitor's power button.
- Press and hold the MENU key for 5 seconds to check that no screen has been turned off on its own.
- Unplug the cable and plug the monitor back into your laptop.
- On a Mac, click the InstantView icon in the menu bar and check that the driver is connected. Make sure Screen Recording is still turned on for macOS InstantView, then reconnect the monitor.
Colors look different on a Mac
- Turn off True Tone in System Settings › Displays. True Tone only adjusts your MacBook's own screen.
- Check that each screen uses the same color profile and a similar brightness.
Netflix or other streaming shows a black screen
Protected streaming (Netflix and similar) depends on your model. Streaming services use a copy-protection rule (HDCP) that can block video on extra screens.
- Triple Aero Pro Max 15.6" (Full HD): works on all screens with Windows. On a Mac, it works only on the screen that runs without the driver (over HDMI).
- Other Silicon Motion monitors: not tested. Play the video on your laptop screen. On the Triple Book Pro Max 15.6", one screen works without the driver, over HDMI: try playing the video there.
Work computer: I can't install the driver
- Ask your IT team to install the Silicon Motion driver from the Silicon Motion download page, then restart the laptop. It's the same industry-standard, secure technology used in docking stations from major brands.
- Without the driver, the Dual Boost, Triple Boost, and Triple Aero Lite screens can't display anything. On the Triple Book Pro Max 15.6" and the Triple Aero Pro Max 15.6", one screen works over HDMI without the driver.
Still not working?
Reach out to our support team at aura-displays.com/pages/support and include:
- your Aura model and a photo or short video of the screens and of the cables plugged into the monitor;
- your laptop model and operating system version (for example, MacBook Air M2, macOS Sequoia, or Dell XPS 13, Windows 11);
- the name and version of the driver you installed;
- a screenshot of your display settings.
Helpful links
- Silicon Motion driver: official download site · Windows · macOS · Ubuntu · Android (USB Display)
- Dual Boost Pro Max 15.6" user manual (PDF): see "Driver installation" (same steps for every Dual Boost and Triple Boost)
- Triple Aero Pro Max 15.6" Lite user manual (PDF)
- Dual Air Max 15.3" user manual (PDF): see "Connection method" for the H5T adapter
- All Drivers & Software articles
Also searched as: Silicon Motion driver, SMI USB Display, SMIUSBDisplay, SM770, InstantView, macOS InstantView, USB Display app, siliconmotion download, driver USB stick, USB key driver, screen recording permission, H5T, H5-T adapter, USB to HDMI adapter, second screen not working M1, MacBook Air one screen only, screens black after sleep, monitor not waking up, Netflix black screen, HDCP, True Tone, colors different, IT blocked driver, work laptop, Dual Boost driver, Dual Boost Pro Gen 4 driver, Triple Boost driver, Triple Aero Lite driver, Triple Book driver, Dual Air driver, Dual Go driver, Dual Play driver